Procedure
Engaging transmission position
1.
2.
Switch on the ignition.
>
You can only engage transmission posi-
tions D, R or N when the engine is running.
Press the button with the brake depressed.
>
With the vehicle stationary, depress the
brake pedal before shifting out of P or N;
otherwise the shift command will not be
executed: shiftlock.
The indicator lamp in the instrument
panel goes out as soon as the parking
brake is ready for operation again.
Indicator lamp on Canadian models.
To prevent the vehicle from creeping
after you select a driving position,
maintain pressure on the brake pedal until
you are ready to start.<
Any noises which occur are normal. Start-up
may take several seconds.
Shifting into D, R, N
Automatic transmission with
Steptronic
In addition to fully automatic operation, you can
also manually shift with the Steptronic, refer to
page 71.
Transmission positions
P R N D M/S + –
To prevent the vehicle from creeping
after you select a driving position, main-
tain pressure on the brake pedal until you are
ready to start.<
Briefly press the selector lever in the desired
direction, beyond a resistance point if neces-
sary. When shifting out of P or into R, simulta-
neously press button 1.
The engaged transmission position is displayed
on the selector lever.
Displays in instrument panel
The selector lever immediately returns to the
center position when released.
Engaging P
P R N D, DS*, S1* through S6*, M1 through M6
The transmission position and the currently
engaged gear are displayed.
Press button P.
Also observe the additional information on the
automatic transmission.
70
Online Edition for Part no. 01 41 2 600 792 - © 09/08 BMW AG
| Categories | BMW Manuals, BMW X5 Manuals, BMW X6 Manuals |
|---|---|
| Tags | BMW E70, BMW E71, BMW X5 35d, BMW X5 48i, BMW X5 xDrive30i, BMW X6 48i, BMW X6 xDrive30i |
| Model Year | 2009 |
| Download File |
|
| Document File Type | |
| Copyright | Attribution Non-commercial |
(0 votes, average: 0 out of 5)