3.
4.
Press the
The LED in the button lights up.
button:
6.
7.
8.
Select "Central locking" and press the con-
troller.
Press the desired memory button 1 or 2:
The LED goes out.
Select "Last seat pos." and press the con-
troller.
The positions of the driver's seat, the exte-
rior rearview mirrors, and steering wheel are
stored for the remote control currently in
use.
Select "After unlocking" or "After door
opened".
Calling up automatically
You can choose when the stored positions of
the driver's seat, exterior rearview mirrors, and
steering wheel are activated.
>
>
Calling up when unlocking vehicle
Calling up when opening driver's door
When using this feature, always make
sure that the footwell behind the driver's
9.
Press the controller.
seat is empty and unobstructed. Failure to do
so could cause injury to persons or damage to
objects behind the seat as a result of a rearward
movement of the seat.<
Deactivating calling up automatically
Select "Deactivated" and press the controller.
Calling up manually
The system cancels the adjustment procedure
when you briefly press one of the seat adjust-
ment switches or one of the memory buttons.
Do not call up a position from the memory
while the vehicle is moving. There is a risk
of accident from unexpected movement of the
seat or steering wheel.<
Selecting calling up automatically
iDrive, for operating principle refer to page 16.
Comfort mode
1.
2.
3.
4.
Open the start menu.
1.
Open the driver's door after unlocking or
switch on radio readiness.
Press the controller to open the menu.
Select "Settings" and press the controller.
2.
Briefly press the desired memory button 1
or 2.
Select "Vehicle / Tires" and press the con-
troller.
The system cancels the adjustment procedure
when you briefly press one of the seat adjust-
ment switches or one of the memory buttons.
5.
Change to upper field if necessary. Turn the
controller until "Door locks" is selected and
press the controller.
Safety feature
1.
Close the driver's door and switch the igni-
tion on or off.
2.
Press the desired memory button 1 or 2
and maintain pressure until the adjustment
process has been completed.
If the
button was pressed inadvertently:
press the button again; the LED goes out.
51
Online Edition for Part no. 01 41 2 600 792 - © 09/08 BMW AG
| Categories | BMW Manuals, BMW X5 Manuals, BMW X6 Manuals |
|---|---|
| Tags | BMW E70, BMW E71, BMW X5 35d, BMW X5 48i, BMW X5 xDrive30i, BMW X6 48i, BMW X6 xDrive30i |
| Model Year | 2009 |
| Download File |
|
| Document File Type | |
| Copyright | Attribution Non-commercial |
(0 votes, average: 0 out of 5)