Indicator lamp displays
Avoiding unintentional alarms
The tilt alarm sensor and interior motion sensor
may be switched off at the same time. This pre-
vents unintentional alarms, e.g. in the following
situations:
>
>
In stacking garages
When transporting on car-carrying trains,
by sea or on a trailer
>
When animals are to remain in the vehicle
>
>
The indicator lamp under the interior rear-
view mirror flashes continuously: the sys-
tem is armed.
Switching off tilt alarm sensor and
interior motion sensor
Press the
button on the remote control
The indicator lamp flashes after locking:
The doors, hood, or liftgate are not properly
closed. Even if you do not close the alerted
area, the system begins to monitor the
remaining areas, and the indicator lamp
flashes continuously after approx. 10 sec-
onds. However, the interior motion sensor
is not activated.
again as soon as the vehicle is locked.
The indicator lamp lights up briefly and then
flashes continuously. The tilt alarm sensor and
the interior motion sensor are switched off until
the next time the vehicle is unlocked and subse-
quently locked again.
>
>
The indicator lamp goes out after unlocking:
your vehicle has not been disturbed while
you were away.
Comfort access*
Comfort access enables you to access your
vehicle without having to hold the remote con-
trol in your hand. It is sufficient to carry the
remote control with you, e.g. in your jacket
pocket. The vehicle automatically detects the
related remote control in the immediate vicinity
or in the interior.
The indicator lamp flashes after unlocking
until the remote control is inserted into the
ignition lock, however for a maximum of
approx. 5 minutes: your vehicle has been
disturbed while you were away.
Tilt alarm sensor
Comfort access supports the following func-
tions:
The tilt of the vehicle is monitored. The alarm
system reacts, e.g. in case of an attempted
wheel theft or towing.
>
>
>
>
Unlocking/locking vehicle
Comfort closing
Opening liftgate
Interior motion sensor
Starting engine
In order for the interior motion sensor to func-
tion properly, the windows and glass sunroof*/
panorama glass sunroof* must be completely
closed.
Functional requirements
>
>
The vehicle can only be unlocked if the
vehicle detects that the remote control car-
ried is not located in the vehicle interior.
The next unlocking and locking cycle is not
possible until after approx. 2 seconds.
39
Online Edition for Part no. 01 41 2 600 792 - © 09/08 BMW AG
| Categories | BMW Manuals, BMW X5 Manuals, BMW X6 Manuals |
|---|---|
| Tags | BMW E70, BMW E71, BMW X5 35d, BMW X5 48i, BMW X5 xDrive30i, BMW X6 48i, BMW X6 xDrive30i |
| Model Year | 2009 |
| Download File |
|
| Document File Type | |
| Copyright | Attribution Non-commercial |
(0 votes, average: 0 out of 5)