251_AKB;
d2ureepe,
4; 52, en-US
2009-03-23T09:22:52+01:00 - Seite 107
Version: 2.11.8.1
Power windows
107
If the door window is blocked again and opens
slightly:
X Immediately after the door window was
blocked, pull and hold the respective
switch upward until the door window is fully
closed.
The door window closes without automatic
reversal function.
G Warning!
Pulling and holding the switch to close the
door window immediately after it had been
blocked two times will cause the door window
to close without any reversal function for as
long as you hold the switch.
Door windows
X Switch on the ignition.
X Opening/closing: Press or pull and hold
switch: to? to the resistance point.
The corresponding window moves
downward or upward until you release the
switch.
Hinged quarter windows
X Switch on the ignition.
X Opening: Press switchA and release.
Both hinged quarter windows open
completely.
X Closing: Pull switchA and release.
X Express operation: Press or pull
switch: to? past the resistance point
and release.
The corresponding window opens or closes
completely.
Both hinged quarter windows close
completely.
X Stopping during express operation:
Press or pull the respective switch again.
i When the obstruction sensor detects that
a hinged quarter windows is blocked during
the closing process, they will stop and open
slightly.
Closing when a door window is blocked
G Warning!
Make sure that nobody can become trapped
and be seriously or even fatally injured when
closing a door window with greater force or
without automatic reversal function.
X Halting closing process: Press or pull
switchA once more during the closing
process.
The hinged quarter windows will stop and
open completely.
If the upward movement of a door window is
blocked during the closing procedure, the
door window will stop and open slightly.
i For your safety, the hinged quarter
windows cannot be opened again until
4
seconds have passed.
X Immediately after the door window has
stopped because it was blocked, pull and
hold the respective switch upward until the
door window is fully closed.
Synchronizing door windows
The door window closes with greater force. The door windows must be synchronized after
the battery has been disconnected or if the
door windows cannot be fully closed (express
operation).
Z
| Categories | Mercedes-Benz Manuals, Mercedes-Benz R-Class Manuals |
|---|---|
| Tags | Mercedes Benz R350, Mercedes Benz R350 BlueTEC, Mercedes Benz V251 |
| Model Year | 2010 |
| Download File |
|
| Document File Type | |
| Copyright | Attribution Non-commercial |
(0 votes, average: 0 out of 5)