251_AKB;
d2ureepe,
4; 52, en-US
2009-03-23T09:22:52+01:00 - Seite 120
Version: 2.11.8.1
Automatic transmission
120
The current gear range appears in the
multifunction display.
The current program mode appears in the
multifunction display.
: Gear range indicator
: Program mode indicator
You should only change the program mode
when the automatic transmission is in park
position P.
The last selected program mode (C or S) is
active when the engine is restarted.
Effect
=
5
With this selection you can use the
braking effect of the engine.
Allows the use of the engine’s
braking effect when driving
Ron steep downgrades
Rin mountainous regions
X Press the program mode selector switch
repeatedly until the letter of the desired
program mode appears in the multifunction
display.
Runder extreme operating
conditions
Selecting program mode C means:
RThe vehicle starts out more gentle, both
forward and reverse, except when driving
off with full throttle.
4
For maximum use of the engine’s
braking effect on very steep or
lengthy downgrades.
RTraction and driving stability are improved
on icy roads.
RUpshifts occur earlier even when you give
more gas. The engine then operates at
lower revolutions and the wheels are less
likely to spin.
Automatic shift program
Selecting program mode S means that
upshifts occur later.
One-touch gearshifting
With the automatic transmission in drive
position D, you can limit or extend the gear
range using the steering wheel gearshift
control.
Program mode selector switch
C Comfort
S Sport
For comfort driving
For standard driving
| Categories | Mercedes-Benz Manuals, Mercedes-Benz R-Class Manuals |
|---|---|
| Tags | Mercedes Benz R350, Mercedes Benz R350 BlueTEC, Mercedes Benz V251 |
| Model Year | 2010 |
| Download File |
|
| Document File Type | |
| Copyright | Attribution Non-commercial |
(0 votes, average: 0 out of 5)