251_AKB;
d2ureepe,
4; 52, en-US
2009-03-23T09:22:52+01:00 - Seite 79
Version: 2.11.8.1
Starter switch positions
79
X Press and hold the tailgate closing switch
in the tailgate (Y page 77) until you hear a
short acoustic signal.
The opening height of the tailgate is limited.
The tailgate will now stop at the stored
position when opened.
the door-mounted remote tailgate switch.
Monitor the closing procedure carefully to
make sure no one is in danger of being
injured.
To interrupt the closing procedure, press or
pull the door-mounted remote tailgate switch.
Deactivating
If the tailgate comes into contact with an
object while closing, the closing procedure is X Press and hold the tailgate closing switch
stopped and the tailgate reopens. This may
happen if luggage has been piled too high, for
example.
in the tailgate (Y page 77) until you hear
two short, consecutive acoustic signals.
X Turn the SmartKey in the starter switch to
position 1 or 2.
X Press remote tailgate opening/closing
switch: until the tailgate begins to close.
While the tailgate is closing an acoustic
warning sounds.
Starter switch positions
SmartKey
G Observe Safety notes, see page 55.
X Interrupting the closing procedure:
Press or pull remote tailgate opening/
closing switch:.
Limiting opening height of tailgate
You can limit the opening height of the
tailgate in the upper opening range. This can
be useful, for example, when the space above
the tailgate is not sufficient.
Starter switch
g For removing SmartKey
Activating
X Open the tailgate: Pull on handle
1 Power supply for some electrical
consumers, e.g. radio
2 Ignition (power supply for all electrical
consumers) and driving position
(
F on the SmartKey until the tailgate
Y page 75) or press and hold button
opens.
X Stop opening procedure: When the
tailgate is in the desired position, press
tailgate closing switch (Y page 77) or pull
on handle once more.
X You can also press or pull the remote
tailgate opening/closing switch
3 Starting position
When you switch on the ignition, all lamps
(except low-beam headlamp indicator lamp,
high-beam headlamp indicator lamp, and turn
signal indicator lamps unless activated) in the
instrument cluster come on. If a lamp in the
instrument cluster fails to come on when the
ignition is switched on, have it checked and
replaced if necessary. If a lamp in the
(
Y page 78) to stop the opening procedure.
instrument cluster remains on after starting
the engine or comes on while driving, refer to
“Lamps in instrument cluster” (Y page 299).
Z
| Categories | Mercedes-Benz Manuals, Mercedes-Benz R-Class Manuals |
|---|---|
| Tags | Mercedes Benz R350, Mercedes Benz R350 BlueTEC, Mercedes Benz V251 |
| Model Year | 2010 |
| Download File |
|
| Document File Type | |
| Copyright | Attribution Non-commercial |
(0 votes, average: 0 out of 5)