251_AKB;
d2ureepe,
4; 52, en-US
2009-03-23T09:22:52+01:00 - Seite 123
Version: 2.11.8.1
Control system
123
Adjusting the instrument cluster
illumination
Control system
Introduction
X To brighten illumination: Press and hold
button= until the desired level of
illumination is reached.
X To dim illumination: Press and hold
button: until the desired level of
illumination is reached.
The control system is activated as soon as the
starter switch is in position 1 (Y page 79).
The control system enables you to call up
information about your vehicle and to change
vehicle settings.
For example, you can use the control system
to find out when your vehicle is next due for
i The instrument cluster illumination is
dimmed or brightened automatically to suit maintenance service, to set the language for
ambient light conditions.
messages in the instrument cluster display,
and much more.
The instrument cluster illumination will also
be adjusted automatically when you switch
on the vehicle’s exterior lamps.
G Warning!
A driver’s attention to the road and traffic
conditions must always be his/her primary
focus when driving.
i With the exterior lighting switched on, the
brightness of the switches in the center
console will also be adjusted when using
button: or=.
For your safety and the safety of others,
selecting features through the multifunction
steering wheel should only be done by the
driver when traffic and road conditions permit
it to be done safely.
Resetting trip odometer
Bear in mind that at a speed of just 30 mph
(approximately 50 km/h), your vehicle is
covering a distance of 44 feet (approximately
X Make sure you are viewing the standard
display (Y page 126) in the multifunction
display.
X Press and hold the reset button in the
instrument cluster (Y page 122) until the
trip odometer is reset.
14
m) every second.
The control system relays information to the
multifunction display.
Multifunction steering wheel
Tachometer
The displays in the multifunction display and
the settings in the control system are
controlled by using the buttons on the
multifunction steering wheel.
The red marking on the tachometer
(
Y page 29) denotes excessive engine speed.
!
Avoid driving at excessive engine speeds,
as it may result in serious engine damage
that is not covered by the Mercedes-Benz
Limited Warranty.
To help protect the engine, the fuel supply is
interrupted if the engine is operated within
the red marking.
Z
| Categories | Mercedes-Benz Manuals, Mercedes-Benz R-Class Manuals |
|---|---|
| Tags | Mercedes Benz R350, Mercedes Benz R350 BlueTEC, Mercedes Benz V251 |
| Model Year | 2010 |
| Download File |
|
| Document File Type | |
| Copyright | Attribution Non-commercial |
(0 votes, average: 0 out of 5)