251_AKB;
d2ureepe,
4; 52, en-US
2009-03-23T09:22:52+01:00 - Seite 317
Version: 2.11.8.1
Replacing wiper blades
317
Opening the passenger-side trim panel
X Gently press the new bulb into its bulb
socket and turn it clockwise until it
engages.
X Align the bulb socket and turn it clockwise.
X Make sure the bulb socket is attached
properly.
X Close the respective cover in the cargo
compartment.
X Close the tailgate.
License plate lamps
X Insert a suitable object such as a coin into
the slot of lock:.
X Turn lock: by 90° in direction of the
arrow.
X Remove cover;.
Replacing bulbs
X Loosen screws: of lamp cover to be
removed.
X Remove lamp cover;.
X Replace the bulb.
X Reinstall lamp cover;.
X Retighten screws:.
Example illustration: Rear lamp driver’s side
: Tail lamp, side marker lamp, brake lamp,
parking and standing lamp bulb socket
; Backup lamp bulb socket
Replacing wiper blades
Safety notes
= Rear fog lamp bulb socket (driver’s side
only)
? Rear turn signal lamp bulb socket
G Warning!
For safety reasons, switch off the wipers and
remove the SmartKey from the starter switch
(vehicles with KEYLESS-GO: Make sure the
vehicle’s on-board electronics have status 0)
before replacing a wiper blade. Otherwise, the
wiper motor could suddenly turn on and cause
injury.
X Depending on which bulb needs to be
replaced, turn the respective bulb socket
counterclockwise.
X Pull the bulb socket out of the housing.
X Gently press onto the bulb and turn it
counterclockwise out of its bulb socket.
Z
| Categories | Mercedes-Benz Manuals, Mercedes-Benz R-Class Manuals |
|---|---|
| Tags | Mercedes Benz R350, Mercedes Benz R350 BlueTEC, Mercedes Benz V251 |
| Model Year | 2010 |
| Download File |
|
| Document File Type | |
| Copyright | Attribution Non-commercial |
(0 votes, average: 0 out of 5)