251_AKB;
d2ureepe,
4; 52, en-US
2009-03-23T09:22:52+01:00 - Seite 339
Version: 2.11.8.1
Towing the vehicle
339
Removing cover in front bumper
Fixing towing eye bolt
Example illustration front bumper
X Press mark on cover: as indicated by the
arrow.
X Lift cover: off to reveal the threaded hole
for the towing eye bolt.
X Take the towing eye bolt and, if so
equipped, the wheel wrench from the
vehicle tool kit.
X Screw towing eye bolt; clockwise into
threaded hole to its stop.
X Insert wheel wrench into towing eye and
tighten towing eye bolt; by turning it
clockwise.
Removing cover in rear bumper
G Warning!
In order to avoid possible serious burns or
injury, use extreme caution when removing
the rear cover, because the rear exhaust pipe
is extremely hot.
or
X If your vehicle is not equipped with a wheel
wrench, use a suitable object to turn the
towing eye bolt.
Removing towing eye bolt
X Loosen towing eye bolt; by turning it
counterclockwise.
X Unscrew towing eye bolt;.
X Reinstalling cover in front bumper:
Engage cover: (Y page 338) on the left
and press on the right.
X Reinstalling cover in rear bumper:
Engage cover: (Y page 339) at top and
press at bottom.
X Pry cover: with a flat, blunt object as a
lever.
X Lift cover: off to reveal the threaded hole X Store the towing eye bolt; and wheel
for the towing eye bolt.
wrench back into the vehicle tool kit.
Z
| Categories | Mercedes-Benz Manuals, Mercedes-Benz R-Class Manuals |
|---|---|
| Tags | Mercedes Benz R350, Mercedes Benz R350 BlueTEC, Mercedes Benz V251 |
| Model Year | 2010 |
| Download File |
|
| Document File Type | |
| Copyright | Attribution Non-commercial |
(0 votes, average: 0 out of 5)