251_AKB;
d2ureepe,
4; 52, en-US
2009-03-23T09:22:52+01:00 - Seite 197
Version: 2.11.8.1
Loading and storing
197
Installing the cargo net
Loosening the cargo net
Cargo net installed behind the C-pillar
: Holder
Belt hook attached in the third-row footwell
X Loosen the tightening belt by pulling
buckle: upward in direction of arrow.
X Remove belt hook; from cargo tie-down
ring=.
; Cargo net bar
= Red button
X Hang cargo net bar; on holder:
indicated by the arrow.
as
Removing and storing the cargo net
X Push cargo net bar; forward into
holder: in direction of arrow.
X Engage lower cargo net bar.
X Take cargo net bar; (Y page 197) out of
holder: (Y page 197).
X Press the red button on the upper and lower
cargo net bar.
The cargo net bar must engage audibly.
Pulling the cargo net tight
X Fold the cargo net.
X Roll up the cargo net.
X Close the hook and loop fasteners on the
cargo net package.
Front storage compartments
G Warning!
To help avoid personal injury during a collision
or sudden maneuver, exercise care when
storing objects in the vehicle. Put luggage or
cargo in the cargo compartment if possible.
Do not pile luggage or cargo higher than the
seat backrests.
Belt hook attached in the third-row footwell
X Hook belt hook: into cargo tie-down
ring; in direction of arrow.
If so equipped, always use the cargo net when
transporting cargo. The cargo net cannot
secure hard or heavy objects.
X Pull tightening belt= by the loose end in
direction of arrow until the cargo net is
pulled tight.
X After driving a short distance, make sure
the cargo net is still tight and, if necessary,
pull it tight again.
Parcel nets cannot secure hard or heavy
objects.
Z
Product Specification
Categories | Mercedes-Benz Manuals, Mercedes-Benz R-Class Manuals |
---|---|
Tags | Mercedes Benz R350, Mercedes Benz R350 BlueTEC, Mercedes Benz V251 |
Model Year | 2010 |
Download File |
|
Document File Type | |
Copyright | Attribution Non-commercial |