2010 Mercedes-Benz S450 4MATIC S550 S600 S63 AMG S65 AMG W221 Owners Manual

221_AKB;
d2ureepe,
5; 101, en-US
2009-05-15T09:42:33+02:00 - Seite 298
Version: 2.11.8.1
Lighting
298
Adaptive control of the headlamp leveling
takes place at a speed of approximately
The system cannot recognize the following
road users:
25
mph (40 km/h).
RRoad users without a lighting system of
their own, e.g. pedestrians
X Deactivating: Pull the combination switch
back to its initial position.
The Adaptive Highbeam Assist
indicator_  in the multifunction display
goes out.
RRoad users with dim lighting of their own,
e.g. cyclists
RRoad users whose lighting is obstructed,
e.g. road users behind a guardrail
High-beam flasher
RIn some seldom cases, even road users with
a lighting system of their own may be
recognized too late or not at all.
X Switching on: Pull the combination switch
briefly in direction of arrow=.
The automatic high-beam headlamps will then
not be deactivated or it will be activated in
spite of preceding or oncoming road users.
Hazard warning flasher
This could endanger you and/or others and
cause an accident. Always pay close attention
to the traffic situation and switch off the high
beam manually if necessary.
The hazard warning flasher can be switched
on at all times, even with the SmartKey
removed from the starter switch.
The hazard warning flasher comes on
automatically when an air bag deploys.
X Activating: Enable theAdaptive
Highbeam Assist via the control system
S 600 and S 65 AMG (USA only):
(
X Turn the exterior lamp switch to position
c.
X Press the combination switch in direction
of arrow:.
Y page 232).
The hazard warning flasher comes on
automatically when you brake the vehicle
strongly at a speed of more than 50 mph
(70
km/h) and bring it to a complete stop.
The Adaptive Highbeam Assist
indicator_  in the multifunction display
comes on when switching on the low-beam
headlamps.
When driving faster than approximately
34
mph (55 km/h) and no other road users
are recognized, the high-beam headlamps
are switched on automatically. The high-
beam headlamp indicator lampK in the
instrument cluster comes on additionally.
When driving slower than approximately
X Switching on: Press hazard warning
flasher switch:.
28
mph (45 km/h), other road users are
recognized, or the road is illuminated
sufficiently, the high-beam headlamps are
switched off automatically. The indicator
lampK  in the instrument cluster goes
out. The Adaptive Highbeam Assist
indicator_  in the multifunction display
remains on.
All turn signal lamps are flashing.
i With the hazard warning flasher activated
and the combination switch set for either
left or right turn, only the respective left or
Product Specification
CategoriesMercedes-Benz Manuals, Mercedes-Benz S-Class Manuals
Tags, , , , ,
Model Year2010
Download File
Please Enter the Security Characters Shown Below. Letters are Case Sensitive. Your download link will appear upon completing this step.
- 544 pages
Document File TypePDF
CopyrightAttribution Non-commercial
(0 votes, average: 0 out of 5)

Submit your review (optional)
(will not be displayed)
* Required Field