221_AKB;
d2ureepe,
5; 101, en-US
2009-05-15T09:42:33+02:00 - Seite 60
Version: 2.11.8.1
Occupant safety
60
X Securely fasten hook=, which is part of
top tether strap?, to anchorage ring;.
X For safety, make sure hook= is attached
to anchorage ring; beyond the safety
catch, as illustrated.
Install child seat according to manufacturer’s
instructions.
The child seat must be firmly attached to both
anchors.
An incorrectly mounted child seat may come
loose during an accident which could result in
serious injury or death to the child.
Once hook= is attached, the child restraint
itself can be secured.
Damaged or impact damaged child seats or
child seat mounting fittings must be replaced.
X Install the child restraint system and
tighten top tether strap? according to the
child restraint manufacturer’s instructions. Each rear outer seat has two LATCH-type
(ISOFIX) anchors for the installation of a
After removing the child restraint system and
LATCH-type (ISOFIX) child seat with matching
top tether strap?:
mounting fittings.
X Reinstall anchorage ring cover:.
Non-LATCH-type (ISOFIX) child seats may
also be used and can be installed using the
vehicle’s seat belt system. Install child seat
according to the manufacturer’s instructions.
G Warning!
Vehicles with rear power seats:
Never change the rear seat position after
installing the child restraint. This could
The LATCH-type (ISOFIX) anchors are
covered with upholstery blends.
Rdamage the child restraint
Rintroduce undesirable slack or tension into
the seat belt
Rloosen the child restraint
Rmisposition the child restraint
All of the above will lessen the
effectiveness of the child restraint and thus
increase the chance or severity of injury in
an accident.
Information sign: indicates the position of
anchor;.
Child seat anchors – LATCH-type
(ISOFIX)
X Bring the rear power seat backrest to a fully
upright position (Y page 283).
X Fold upholstery blend= upward to access
anchors;.
G Observe Safety notes, see page 56.
G Warning!
Children too big for a toddler restraint must
ride in seats using regular seat belts. Position
shoulder belt across chest and shoulder, not
face or neck.
X Turn installation device? to a vertical
position so that upholstery blend=
does
not fold down.
A booster seat may be necessary to achieve
proper seat belt positioning for children over
X Install a LATCH-type (ISOFIX) child seat
according to the manufacturer’s
instructions.
41
lb (18 kg) until they reach a height where
a lap/shoulder belt fits properly without a
booster.
A rigid connection between the child seat
and the body of the vehicle is established.
| Categories | Mercedes-Benz Manuals, Mercedes-Benz S-Class Manuals |
|---|---|
| Tags | Mercedes-Benz S450, Mercedes-Benz S550, Mercedes-Benz S600, Mercedes-Benz S63 AMG, Mercedes-Benz S65 AMG, Mercedes-Benz W221 |
| Model Year | 2010 |
| Download File |
|
| Document File Type | |
| Copyright | Attribution Non-commercial |
(0 votes, average: 0 out of 5)