221_AKB;
d2ureepe,
5; 101, en-US
2009-05-15T09:42:33+02:00 - Seite 339
Version: 2.11.8.1
Driving systems
339
Ryou depress the brake pedal fully again
until the messageHOLD in the multifunction
display disappears
Ra system malfunction occurs
Rthe on-board voltage is insufficient
The HOLD function is deactivated.
Ryou engage the electronic parking brake
Ryou activate the DISTRONIC PLUS
AIRMATIC
i After a while, the vehicle will be secured
by the electronic parking brake to relieve
the service brake.
Introduction
The AIRMATIC lets you select the chassis and
suspension setup. The chassis and
G Warning!
suspension setup adjusts the damping
behavior and the ride height for your vehicle.
The braking effect of the HOLD function is
canceled and the vehicle can start to roll if
The AIRMATIC consists of two components.
The Adaptive Damping System (ADS)
Rthe HOLD function is deactivated by
depressing the accelerator pedal or the
brake pedal
(
(
Y page 339) and the vehicle level control
Y page 340).
Rthe HOLD function or the power supply is
malfunctioning, e.g. due to battery failure
Adaptive Damping System (ADS)
Rthe electrical components in the engine
compartment or the fuses have been
manipulated
The Adaptive Damping System (ADS) is
controlled electronically and operates
continuously. It adjusts the damping
characteristics to the current operating and
driving conditions. The damping is adjusted
individually for each wheel. Driving safety and
tire comfort are increased.
Rthe battery is disconnected
G Warning!
Never get out of the vehicle while the HOLD
function is activated!
The fine tuning of the damping is dependent
on
The HOLD function must never be operated
or deactivated by passengers or from outside
the vehicle.
Ryour driving style
Rroad surface conditions
The HOLD function does not replace the
electronic parking brake. It must not be used
to secure the vehicle when parking.
Ryour personal settings
The selected setting remains stored in
memory even if the SmartKey is removed
from the starter switch.
Deactivate the HOLD function when leaving
or parking the vehicle. Use the electronic
parking brake to secure the vehicle.
When the HOLD function is activated, the
automatic transmission shifts into park
position P automatically when
Ropening the driver’s door and releasing the
seat belt
Rturning off the engine
Ropening the hood
Z
| Categories | Mercedes-Benz Manuals, Mercedes-Benz S-Class Manuals |
|---|---|
| Tags | Mercedes-Benz S450, Mercedes-Benz S550, Mercedes-Benz S600, Mercedes-Benz S63 AMG, Mercedes-Benz S65 AMG, Mercedes-Benz W221 |
| Model Year | 2010 |
| Download File |
|
| Document File Type | |
| Copyright | Attribution Non-commercial |
(0 votes, average: 0 out of 5)