2010 Mercedes-Benz S450 4MATIC S550 S600 S63 AMG S65 AMG W221 Owners Manual

221_AKB;
d2ureepe,
5; 101, en-US
2009-05-15T09:42:33+02:00 - Seite 71
Version: 2.11.8.1
Anti-theft systems
71
To maintain the proper distance to the vehicle  i  The PRE-SAFE® Brake will remain passive
in front of you and thus prevent a rear-end
collision, you must apply the brakes yourself.
while DISTRONIC PLUS is switched on
(Y page 326).
X Brake the vehicle immediately to avoid a
collision.
After a hard collision or damage to the front
of the vehicle from an accident, have the
Under no circumstances should the driver     settings and operation of the radar sensors
await the intermittent warning sound
before braking. Observe the following
warning note.
checked by an authorized Mercedes-Benz
Center.
When traveling in Canada in a vehicle not
The intermittent warning sound ceases and   registered in Canada, you must switch off the
the distance warning lamp·  goes out
radar sensor system (Y page 234). Canadian
when the necessary distance to the vehicle   law does not permit the use of the radar
ahead is again established.
sensor system for vehicles from outside of
Canada.
The PRE-SAFE® Brake can react to stationary
obstacles such as standing or parked vehicles  When you switch off the radar system, the
at road speeds of up to approximately 40 mph  following functions are deactivated:
(70
km/h).
RPRE-SAFE® Brake
G Warning!
RBAS PLUS (Y page 64)
If you do not receive visual or acoustic
warning signals, the PRE-SAFE® Brake may
RDISTRONIC PLUS (Y page 326)
RBlind Spot Assist (Y page 355)
Rnot have recognized the collision risk
Rhave been deactivated
X Activating and deactivating: Activate or
deactivate the PRE-SAFE® Brake using the
instrument cluster control system
Rbe malfunctioning
(
After the function has been activated, the
PRE-SAFE® Brake indicatorÄ   appears
Y page 230).
Apply the brakes yourself to avoid a collision.
The PRE-SAFE® Brake does not always clearly
interpret complex traffic situations. If a visual
and/or acoustic warning is issued in an
uncritical driving situation, or if the vehicle
in the instrument cluster. When the HOLD
function is switched on, the PRE-SAFE®
Brake indicatorÄ  will not appear.
brakes lightly, you can interrupt the PRE-
SAFE® Brake maneuver by pressing down all
the way on the accelerator pedal, using
kickdown, or releasing the brake pedal.
The PRE-SAFE® Brake maneuver is
Anti-theft systems
Immobilizer
terminated immediately when
The immobilizer prevents unauthorized
Ryou avoid the obstacle by evasive steering     persons from starting your vehicle.
When leaving the vehicle, always take the
Ryou drive less than 9 mph (15 km/h)
SmartKey with you and lock the vehicle. The
Ran obstacle can no longer be identified
engine can be started by anyone with a valid
ahead of you
SmartKey that is left inside the vehicle.
Rthe system no longer senses the risk of a
collision
Z
Product Specification
CategoriesMercedes-Benz Manuals, Mercedes-Benz S-Class Manuals
Tags, , , , ,
Model Year2010
Download File
Please Enter the Security Characters Shown Below. Letters are Case Sensitive. Your download link will appear upon completing this step.
- 544 pages
Document File TypePDF
CopyrightAttribution Non-commercial
(0 votes, average: 0 out of 5)

Submit your review (optional)
(will not be displayed)
* Required Field