221_AKB;
d2ureepe,
5; 101, en-US
2009-05-15T09:42:33+02:00 - Seite 446
Version: 2.11.8.1
Vehicle status messages in the multifunction display
446
lower the trunk floor before closing the
trunk.
Certain warning and malfunction messages
are accompanied by an audible signal.
Address these messages accordingly and
follow the additional instructions given in this
Operator’s Manual.
High-priority messages are shown in red in
the multifunction display. Messages of lower
priority are shown in yellow or white.
Certain messages of high priority cannot be
cleared from the multifunction display using
a or% on the multifunction steering
wheel (Y page 218).
Other messages of high priority and
messages of less immediate priority can be
cleared from the multifunction display using
a or%. They are then stored in the
vehicle status message memory
(Y page 231). Remember that clearing a
message will only make the message
disappear. Clearing a message will not
correct the condition that caused the
message to appear.
X Remove spare wheel mounting= by
turning it counterclockwise.
i Vehicle tool kit box; can only be
removed together with spare wheel
mounting=.
After removing spare wheel mounting=,
you can disengage vehicle tool kit box;
from spare wheel mounting=.
G Warning!
X Remove spare wheel:.
All categories of messages contain important
information which should be taken note of
and, where a malfunction is indicated,
addressed as soon as possible at an
authorized Mercedes-Benz Center.
The spare wheel bolts are located in a
container on the spare wheel rim.
X Take off the spare wheel bolts.
For information on mounting the spare wheel,
see “Flat tire” (Y page 502).
Failure to repair the condition noted may
cause damage not covered by the Mercedes-
Benz Limited Warranty, or result in property
damage or personal injury.
Storing the spare wheel after use
X Place spare wheel: into the spare wheel
well (Y page 446).
X Secure spare wheel: by turning spare
G Warning!
No messages will be displayed if either the
instrument cluster or the multifunction
display is inoperative.
wheel mounting= clockwise
(
Y page 446).
As a result, you will not be able to see
information about your driving conditions,
such as
Vehicle status messages in the
multifunction display
Rspeed
Notes
Routside temperature
Warning and malfunction messages appear in
the multifunction display located in the
instrument cluster.
Rwarning/indicator lamps
| Categories | Mercedes-Benz Manuals, Mercedes-Benz S-Class Manuals |
|---|---|
| Tags | Mercedes-Benz S450, Mercedes-Benz S550, Mercedes-Benz S600, Mercedes-Benz S63 AMG, Mercedes-Benz S65 AMG, Mercedes-Benz W221 |
| Model Year | 2010 |
| Download File |
|
| Document File Type | |
| Copyright | Attribution Non-commercial |
(0 votes, average: 0 out of 5)