L
Adaptivecruisecontrol
The set speed and gap can be overridden by
depressing the accelerator pedal while cruising
at constant speed or in Follow mode. If the
vehicle is in Follow mode when the ACC is
overridden, the Follow mode warning lamp will
go out and CRUISE OVERRIDE will be displayed
in the message centre. When the accelerator is
released the ACC function will operate again and
vehicle speed will decrease to the set speed, or
a lower speed if Follow mode is active.
ACC AUTO OFF
ACC will disengage, but not clear the memory
when:
•
•
•
•
•
•
The CANCEL button is pressed.
The brake pedal is pressed.
Neutral (N) is selected.
Dynamic Stability Control (DSC) activates.
Electronic Traction Control (ETC) activates.
Hill Descent Control (HDC) is selected.
QUEUE ASSIST
ACC will disengage, and clear the memory
when:
Queue assist is an enhancement of Adaptive
cruise control and, when active, will follow a
vehicle ahead to a standstill. It is intended for
use in lines of traffic on major roads where
minimal steering is required.
•
•
•
The ignition system is switched off
Maximum vehicle speed is reached
A fault occurs in the ACC system.
If a vehicle ahead slows to a halt, Queue assist
will bring the vehicle to a stop and hold it
stationary.
RESUMING THE SPEED AND FOLLOW
MODE
While the vehicle is held stationary, Queue assist
will request the Electric park brake (EPB) to
apply if:
RES should only be used if the driver is
aware of the set speed and intends to
return to it.
•
•
The driver cancels Queue assist.
By pressing the RES button after ACC has been
cancelled (e.g. after braking), ACC will become
active again provided that the set speed memory
has not been erased. The original set speed will
be resumed (unless a vehicle ahead causes the
Follow mode to become active) and the set
speed will be displayed in the message centre.
Queue assist may be resumed above 10 km/h
The vehicle is stopped for more than 2
minutes.
•
Driver intention to exit the vehicle is
detected.
•
A malfunction is detected.
As the vehicle ahead moves away, a brief press
on the accelerator will resume ACC operation.
(6
mph).
At very low speed Queue assist may stop for
stationary objects, e.g., when the vehicle ahead
changes lane to reveal a stationary object. The
vehicle radar cannot always distinguish between
a stationary vehicle and a fixed object like a road
sign, drain cover or temporary barrier. This may
cause unexpected braking or cancellation and
the driver should intervene if appropriate.
Note: When the set speed is resumed, the rate
of acceleration is influenced by the previously
set Follow mode gap. A closer set gap will
promote greater acceleration.
128
XML to PDF by RenderX XEP XSL-FO Formatter, visit us at http://www.renderx.com/
| Categories | Land Rover, Range Rover |
|---|---|
| Tags | Land Rover |
| Model Year | 2014, 2015 |
| Download File |
|
| Document Type | Owners Manual |
| Language | English |
| Product Name | Range Rover Sport Handbook |
| Product Brand | Land Rover |
| Document File Type | |
| Publisher | landrover.com |
| Wikipedia's Page | http://en.wikipedia.org/wiki/Land_Rover |
| Copyright | Attribution Non-commercial |
(4 votes, average: 4 out of 5)
Automotive readers have rated 2014-2015 Land Rover Range Rover Sport Handbook Manual 4.0 out of 5.0 based on 4 product reviews. very good and for the first time
I search for heat device control system
Excellent source. Easy to follow
good to finally getting manual from here