R
Garagedooropener
GARAGE DOOR TRANSCEIVER
BEFORE PROGRAMMING
Do not use the transceiver with any
garage door opener that lacks the
safety stop and reverse feature as
required by safety standards.
When programming a device that may
require you to press and re-press the
hand-held transmitter (cycle), unplug
the device during the cycling process to
prevent possible motor failure.
When programming the transceiver to
a garage door opener or entry gate,
make sure the area is clear. This will
prevent potential harm or damage as
the gate or garage door will activate
during the program.
For best results, fit a new battery to the
hand-held transmitter of the garage door opener
(or other device) before programming. If your
garage door opener receiver (located in the
garage) is equipped with an antenna, make sure
the antenna is hanging straight down.
This device may suffer from interference
if operated in the vicinity of a mobile or
fixed station transmitter. This
PROGRAMMING
interference is likely to affect the
hand-held transmitter as well as the
in-car transceiver.
The door transceiver is located in the rear-view
mirror. It can be programmed to transmit the
radio frequencies of up to 3 different
transmitters, which can be used to operate
garage doors, entry gates, home lighting,
security systems or other radio frequency
operated devices.
With the engine switched off;
1. Make sure the ignition system is on.
Although this section mainly describes the
procedures for a garage door opener, it equally
applies to the previously mentioned
applications.
2. Hold the end of the original garage door
opener hand-held transmitter 50 to 150 mm
(2 to 6 inches) away from the transceiver
in the rear-view mirror, keeping the
indicator lamp in view.
In some countries, this feature is also known
as the HomeLink® Universal Transceiver.
3. Using both hands, simultaneously press
and hold both the chosen transceiver button
on the rear-view mirror, as shown above,
and the hand-held transmitter button. Keep
both buttons pressed. The indicator lamp
will flash slowly at first and then change to
a fast flash. When the indicator lamp flashes
rapidly, release both buttons. The rapid
flashing lamp indicates successful
For further information, see 69, INFORMATION
AND ASSISTANCE.
programming.
67
XML to PDF by RenderX XEP XSL-FO Formatter, visit us at http://www.renderx.com/
| Categories | Land Rover, Range Rover |
|---|---|
| Tags | Land Rover |
| Model Year | 2014, 2015 |
| Download File |
|
| Document Type | Owners Manual |
| Language | English |
| Product Name | Range Rover Sport Handbook |
| Product Brand | Land Rover |
| Document File Type | |
| Publisher | landrover.com |
| Wikipedia's Page | http://en.wikipedia.org/wiki/Land_Rover |
| Copyright | Attribution Non-commercial |
(4 votes, average: 4 out of 5)
Automotive readers have rated 2014-2015 Land Rover Range Rover Sport Handbook Manual 4.0 out of 5.0 based on 4 product reviews. very good and for the first time
I search for heat device control system
Excellent source. Easy to follow
good to finally getting manual from here