L
Tyrerepairkit
Watch the tyre sidewall during
Note: All vehicle drivers and occupants should
be made aware that a temporary repair has been
made to a tyre fitted to the vehicle. They should
also be made aware of the special driving
conditions imposed when using a repaired tyre.
inflation. If any cracks, bumps or
similar damage, or deformities appear,
switch off the compressor and deflate
the tyre. Do not continue to use the
tyre.
REPAIR PROCEDURE
USING THE TYRE REPAIR KIT
Check the tyre sidewall prior to
inflation. If there are any cracks,
bumps or similar damage, do not
attempt to inflate the tyre. Do not stand
directly beside the tyre while the
compressor is pumping. Watch the tyre
sidewall. If any cracks, bumps or
similar damage appear, turn off the
compressor and let the air out by
means of the pressure relief valve. Do
not continue to use the tyre.
Avoid skin contact with the sealant
which contains natural rubber latex.
If the tyre inflation pressure does not
reach 1.8 bar (26 psi, 180 kPa) within
7
minutes, the tyre may have suffered
excessive damage. A temporary repair
will not be possible, and the vehicle
should not be driven until the tyre has
been replaced.
Before attempting a tyre repair, make
sure the vehicle is parked safely, as far
away from passing traffic as possible.
If the tyre inflation pressure does not
reach 1.8 bar (26 psi, 180 kPa) within
10 minutes, the tyre may have suffered
excessive damage. A temporary repair
will not be possible, and the vehicle
should NOT be driven until the tyre has
been replaced.
Make sure the parking brake is applied
and transmission Park (P ) is selected.
Do not attempt to remove foreign
objects such as nails, screws, etc. from
the tyre.
1.
Open the tyre repair kit and peel off the
maximum speed label. Attach the label to
the fascia in the driver's field of vision. Take
care not to obstruct any of the instruments
or warning lights.
Always run the engine when using the
compressor, unless the vehicle is in an
enclosed or poorly ventilated space, as
this may cause asphyxiation.
2. Uncoil the compressor power cable and the
inflation hose.
3.
4.
Unscrew the orange cap from the sealant
bottle receiver and the sealant bottle cap.
To prevent overheating, do not operate
the compressor continuously for longer
than 10 minutes.
Screw the sealant bottle into the receiver
(clockwise) until tight.
Note: Screwing the bottle onto the receiver
will pierce the bottle's seal. Once the
receiver has been fitted, a ratchet prevents
it from being removed.
242
XML to PDF by RenderX XEP XSL-FO Formatter, visit us at http://www.renderx.com/
| Categories | Land Rover, Range Rover |
|---|---|
| Tags | Land Rover |
| Model Year | 2014, 2015 |
| Download File |
|
| Document Type | Owners Manual |
| Language | English |
| Product Name | Range Rover Sport Handbook |
| Product Brand | Land Rover |
| Document File Type | |
| Publisher | landrover.com |
| Wikipedia's Page | http://en.wikipedia.org/wiki/Land_Rover |
| Copyright | Attribution Non-commercial |
(4 votes, average: 4 out of 5)
Automotive readers have rated 2014-2015 Land Rover Range Rover Sport Handbook Manual 4.0 out of 5.0 based on 4 product reviews. very good and for the first time
I search for heat device control system
Excellent source. Easy to follow
good to finally getting manual from here