L
Adaptivecruisecontrol
3.
4.
5.
There may be issues with the detection of
vehicles in front when going into and
coming out of a bend.
Tyres other than those recommended for your
vehicle may have different circumferences. This
can affect the correct operation of ACC.
When moving around a stationary vehicle.
This may cause uncertainty as to which
vehicle should be followed.
FORWARD ALERT FUNCTION
The system may not react to slow
moving vehicles.
When the vehicle ahead turns out of your
lane. This may cause uncertainty as to
which vehicle should be followed.
Forward alert uses the same radar
sensor as Adaptive cruise control. The
same performance limitations apply,
see 126, ADAPTIVE CRUISE CONTROL
OVERVIEW.
In these situations ACC may operate
unexpectedly. The driver should stay alert and
intervene if necessary.
ACC MALFUNCTION
Forward alert can be enabled/disabled via the
Driver information centre menu. See 46,
INSTRUMENT PANEL MENU.
If a fault occurs while ACC or Follow mode is
operational, ACC will switch off and cannot be
used until the fault is cleared. The message
DRIVER INTERVENE is displayed briefly in the
message centre and is then replaced by the
message CRUISE NOT AVAILABLE.
The warning lamp in the instrument panel
illuminates when Forward alert is enabled (see
52,
FORWARD ALERT (GREEN)).
Forward alert provides limited detection and
warning of objects close ahead while the vehicle
is moving forwards. If a vehicle or object ahead
is within the user defined sensitivity area, a
warning tone will sound and the FORWARD
ALERT message will be displayed in the
message centre. Advanced emergency brake
assist will be activated. See 131, ADVANCED
EMERGENCY BRAKE ASSIST
If a fault with ACC or any related system occurs
at any other time, the message CRUISE NOT
AVAILABLE will be displayed. It will not be
possible to activate ACC in any mode.
Accumulations of dirt, snow or ice on the radar
sensor or cover may inhibit ACC operation.
Fitting of a vehicle front protector or metallised
badges may also affect ACC operation.
If this occurs in ACC cruise /Follow mode, the
audible alarm sounds and the message DRIVER
INTERVENE is displayed briefly. The message
RADAR SENSOR BLOCKED will then be
displayed.
The driver must take appropriate action
immediately.
Sensitivity of the function can be adjusted only
when Adaptive cruise control is disengaged.
Adjust as follows:
Note: The same messages may also be
displayed while driving on open roads with few
objects for the radar to detect.
•
Using the steering wheel Adaptive cruise
control buttons, press the gap decrease
button to display the current setting in the
message centre and then press again to
decrease the sensitivity of the alert.
Clearing the obstruction allows the system to
return to normal operation. If the obstruction
is present when ACC is inactive (e.g. on initial
starting or with ACC switched off), the message
RADAR SENSOR BLOCKED will be displayed.
130
XML to PDF by RenderX XEP XSL-FO Formatter, visit us at http://www.renderx.com/
| Categories | Land Rover, Range Rover |
|---|---|
| Tags | Land Rover |
| Model Year | 2014, 2015 |
| Download File |
|
| Document Type | Owners Manual |
| Language | English |
| Product Name | Range Rover Sport Handbook |
| Product Brand | Land Rover |
| Document File Type | |
| Publisher | landrover.com |
| Wikipedia's Page | http://en.wikipedia.org/wiki/Land_Rover |
| Copyright | Attribution Non-commercial |
(4 votes, average: 4 out of 5)
Automotive readers have rated 2014-2015 Land Rover Range Rover Sport Handbook Manual 4.0 out of 5.0 based on 4 product reviews. very good and for the first time
I search for heat device control system
Excellent source. Easy to follow
good to finally getting manual from here