L
Exteriorlights
Unless required or prohibited by law,
To manually override to low beam from high
beam, pull the stalk to the flash position and
High beam assist will be cancelled. To return to
High beam assist, push the stalk to the high
beam position and then return it to the central
position.
daytime running lamps can be
disabled or enabled by a Land Rover
Dealer/Authorised Repairer.
HEADLAMP COURTESY DELAY
To turn off High beam assist, turn the lighting
control from AUTO to headlamps on.
This feature operates whenever the headlamp
control is left in the AUTO position and the
ignition is turned off. The headlamps will remain
illuminated for up to 240 seconds.
This feature can be disabled/enabled using the
Vehicle Set-Up menu (see 46, INSTRUMENT
PANEL MENU).
Note: The time delay may be changed via the
Vehicle Set-Up menu (see 46, INSTRUMENT
PANEL MENU).
The following may affect the operation of High
beam assist:
•
•
Highly reflective road signs.
HIGH BEAM ASSIST
Dimly lit road users, for example cyclists or
pedestrians.
This feature automatically selects and deselects
high beam, under specific conditions of road
lighting and in the absence of other vehicle’s
lights. The system is only active when the
ambient light drops below a predetermined
level.
•
Adverse weather conditions, for example
rain or fog.
•
•
•
Dirty or obscured sensor.
Dirty, damaged, or misted windscreen.
Note: It is not recommended that High beam
assist is used while driving off road.
Oncoming vehicles partially obscured by a
central highway barrier.
See 52, HIGH BEAM ASSIST (GREEN).
Note: The system cannot be relied upon to
activate or de-activate high beam in all possible
circumstances. It remains the driver’s
responsibility to make sure correct use of the
headlamps at all times.
For High beam assist to become operational,
the lighting control must be in the AUTO
position, with low beam headlamps selected.
See 53, LIGHTING CONTROL.
Note: Make sure the sensor on the back of the
rear view mirror is not blocked or obstructed.
The system will only activate when the vehicle
speed exceeds 40 km/h (25 mph). The system
will deactivate when vehicle speed drops below
ADAPTIVE FRONT LIGHTING SYSTEM
(AFS)
24
km/h (15 mph).
To manually select high beam, move the stalk
to the high beam position as normal. To return
to High beam assist, move the stalk back to the
central position.
When cornering using dipped beam, AFS will
adjust the headlamp beams to provide improved
illumination in the direction of travel.
AFS is deactivated when:-
•
•
•
Reverse gear is selected.
The vehicle is stationary.
Daytime running lamps are on.
54
XML to PDF by RenderX XEP XSL-FO Formatter, visit us at http://www.renderx.com/
| Categories | Land Rover, Range Rover |
|---|---|
| Tags | Land Rover |
| Model Year | 2014, 2015 |
| Download File |
|
| Document Type | Owners Manual |
| Language | English |
| Product Name | Range Rover Sport Handbook |
| Product Brand | Land Rover |
| Document File Type | |
| Publisher | landrover.com |
| Wikipedia's Page | http://en.wikipedia.org/wiki/Land_Rover |
| Copyright | Attribution Non-commercial |
(4 votes, average: 4 out of 5)
Automotive readers have rated 2014-2015 Land Rover Range Rover Sport Handbook Manual 4.0 out of 5.0 based on 4 product reviews. very good and for the first time
I search for heat device control system
Excellent source. Easy to follow
good to finally getting manual from here