L
Maintenance
Set the air suspension to the Off-road height
position, for increased access to the bumper
fixings. See 108, OFF-ROAD HEIGHT.
Note: Refitting of the headlamp unit is the
reverse of the removal process.
XENON LAMPS
1.
Remove the under bonnet access cover next
to the headlamp to be removed. See 203,
UNDER BONNET COVERS - REMOVAL.
Replacement or maintenance of Xenon
lamps should only be carried out by
suitably qualified personnel.
2.
3.
Remove the 4 securing clips from the grille.
Gently and evenly pull the grille forwards to
release the 4 lower clips and remove the
grille. Place the grille where it will not be
damaged.
High voltage is required to ignite the
gas and metal vapour which are used
to power Xenon lamps. Contact with
this voltage can cause serious injury.
4.
5.
6.
Remove the fixing and release the covering
trim.
Xenon lamp units operate at a very
high temperature. Make sure the lamp
units have cooled before attempting to
touch them.
Remove the 3 retaining bolts from the
headlamp.
Using a suitable tool, gently apply
downward pressure to release the securing
clip.
Seek advice about the correct
disposal of Xenon lamp units from
a Land Rover Dealer/Authorised
Repairer, or your local authority.
Do not attempt to remove the headlamp
at this stage.
7.
8.
Remove the fixing from the wing splash
shield.
HALOGEN BULBS
Gently pull the splash shield rearward for
access.
Take care not to touch this type of bulb
with your fingers; always use a cloth to
handle them. If necessary, clean the bulb
with methylated spirits to remove
fingerprints.
9.
Remove the bumper securing screw.
10.
Gently and evenly pull the edge of the
bumper to release the 3 securing clips from
the wing panel.
Do not use excessive force, as this may
cause damage to the vehicle.
Note: Only limited movement is required to
separate the upper edge of the bumper from
the lower edge of the headlamp.
11.
Release the electrical connectors and
remove the headlamp.
Place face down on a flat surface covered
in a soft material to prevent damage.
206
XML to PDF by RenderX XEP XSL-FO Formatter, visit us at http://www.renderx.com/
| Categories | Land Rover, Range Rover |
|---|---|
| Tags | Land Rover |
| Model Year | 2014, 2015 |
| Download File |
|
| Document Type | Owners Manual |
| Language | English |
| Product Name | Range Rover Sport Handbook |
| Product Brand | Land Rover |
| Document File Type | |
| Publisher | landrover.com |
| Wikipedia's Page | http://en.wikipedia.org/wiki/Land_Rover |
| Copyright | Attribution Non-commercial |
(4 votes, average: 4 out of 5)
Automotive readers have rated 2014-2015 Land Rover Range Rover Sport Handbook Manual 4.0 out of 5.0 based on 4 product reviews. very good and for the first time
I search for heat device control system
Excellent source. Easy to follow
good to finally getting manual from here