Driving your vehicle
Starting the diesel engine
i Information
i Information
To start the diesel engine when the
engine is cold, it has to be pre-heat-
ed before starting the engine and
then have to be warmed up before
starting to drive.
•
Do not wait for the engine to warm
up while the vehicle remains station-
ary.
If the engine does not start within 10
seconds after preheating is completed,
turn the ignition switch once more to
the LOCK position and wait for 10
seconds. Then turn the ignition switch
to the ON position in order to preheat
Start driving at moderate engine
speeds. (Steep accelerating and
decelerating should be avoided.)
Vehicle with manual transaxle:
1.
Make sure the parking brake is the engine again.
applied.
•
Always start the vehicle with your
foot on the brake pedal. Do not
depress the accelerator while start-
ing the vehicle. Do not race the
engine while warming it up.
2.
Make sure the shift lever is in neu-
tral.
3. Depress the clutch and brake ped-
als.
4.
Turn the ignition switch to the ON
position to pre-heat the engine.
The glow indicator light (
illuminate.
) will
5.
When the glow indicator light (
)
goes out, turn the key ignition
switch to the START position. Hold
the key (maximum of 10 seconds)
until the engine starts and release
it.
5-8
| Categories | Hyundai Manuals, Hyundai Creta Manuals |
|---|---|
| Download File |
|
| Document Type | Owners Manual |
| Language | English |
| Product Brand | Hyundai, Creta |
| Document File Type | |
| Copyright | Attribution Non-commercial |
(0 votes, average: 0 out of 5)