9.
Loosen the lug nuts with the wheel
lug nut wrench and remove them
with your fingers. Remove the
wheel from the studs and lay it flat
on the ground out of the way.
Remove any dirt or debris from
the studs, mounting surfaces, and
wheel.
10.
Install the spare tire onto the
studs of the hub.
11.
Tighten the lug nuts with your fin-
gers onto the studs with the
OGC064006
OGS065007
8.
Insert the jack handle into the jack
and turn it clockwise, raising the
vehicle until the tire clears the
ground. Make sure the vehicle is
stable on the jack.
smaller end of the lug nuts clos- 13. Use the wheel lug nut wrench to
est to the wheel.
tighten the lug nuts in the order
shown. Double-check each lug
nut until they are tight. After
changing tires, we recommend
that an authorized HYUNDAI
dealer tighten the lug nuts to their
proper torque as soon as possi-
ble. The wheel lug nut should be
tightened to 9~11 kg.m (65~79
lb.ft).
12.
Lower the vehicle to the ground
by turning the jack handle coun-
terclockwise.
6
6-19
| Categories | Hyundai Manuals, Hyundai Creta Manuals |
|---|---|
| Download File |
|
| Document Type | Owners Manual |
| Language | English |
| Product Brand | Hyundai, Creta |
| Document File Type | |
| Copyright | Attribution Non-commercial |
(0 votes, average: 0 out of 5)