Maintenance
Headlight (Low/High) and static
bending light replacement
•
Always handle them carefully,
and avoid scratches and abra-
sions. If the bulbs are lit, avoid
contact with liquids. Never touch
the glass with bare hands.
Residual oil may cause the bulb
to overheat and burst when lit. A
bulb should be operated only
when installed in a headlight.
Low/High
Turn signal
•
•
If a bulb becomes damaged or
cracked, replace it immediately
and carefully dispose of it.
OLMB073042L
Wear
eye
protection
when
Static bending light
WARNING
changing a bulb. Allow the bulb
to cool down before handling it.
OGS075051
1.
2.
Open the hood.
Halogen bulbs
Remove the headlight bulb cover
by turning it counterclockwise.
•
Halogen bulbs contain pressur-
ized gas that will produce flying
pieces of glass if broken.
3.
4.
Disconnect the headlight bulb
socket-connector.
(Continued)
i Information
Unsnap the headlight bulb retain-
ing wire by depressing the end
and pushing it upward.
(Continued)
If the headlight aiming adjustment is
necessary after the headlight assembly
is reinstalled, consult an authorized 5. Remove the bulb from the head-
HYUNDAI dealer.
light assembly.
7-82
| Categories | Hyundai Manuals, Hyundai Creta Manuals |
|---|---|
| Download File |
|
| Document Type | Owners Manual |
| Language | English |
| Product Brand | Hyundai, Creta |
| Document File Type | |
| Copyright | Attribution Non-commercial |
(0 votes, average: 0 out of 5)