Starting and stopping the engine
for turbocharger intercooler
NOTICE
NOTICE
To prevent damage to the vehicle:
To prevent damage to the vehicle:
1.
Do not race or accelerate the
engine immediately after starting
the engine.
•
If the engine stalls while you are in When the stop lamp fuse is blown,
motion, do not attempt to move the you can't start the engine normally.
shift lever to the P (Park) position.
Replace the fuse with a new one. If
you are not able to replace the fuse,
you can start the engine by pressing
and holding the Engine Start/Stop
button for 10 seconds with the
Engine Start/Stop button in the ACC
position.
If the engine is cold, idle for sever-
al seconds before sufficient lubri-
cation is ensured in the turbo
charger unit.
If traffic and road conditions per-
mit, you may put the shift lever in
the N (Neutral) position while the
vehicle is still moving and press
the Engine Start/Stop button in an
attempt to restart the engine.
2.
After high speed or extended driv-
ing that requires heavy engine
load, idle the engine about one
minute before turning the engine
off. This idle time will allow the tur-
bocharger to cool prior to shutting
the engine off.
Do not press the Engine Start/Stop
button for more than 10 seconds
except when the stop lamp fuse is
blown.
•
Do not push or tow your vehicle to
start the engine.
5
For your safety always depress the
brake and/or clutch pedal before
starting the engine.
NOTICE
Do not turn off the engine immedi-
ately after it has been subjected to a
heavy load. Doing so may cause
severe damage to the engine or
turbo charger unit.
5-17
| Categories | Hyundai Manuals, Hyundai Creta Manuals |
|---|---|
| Download File |
|
| Document Type | Owners Manual |
| Language | English |
| Product Brand | Hyundai, Creta |
| Document File Type | |
| Copyright | Attribution Non-commercial |
(0 votes, average: 0 out of 5)