6.
Install a new headlight bulb and Turn signal light
snap the headlight bulb retaining
Front fog light bulb replacement
1.
Remove the turn signal light bulb 1.Remove the under cover by rotat-
ing the screws and bolts.
wire into position by aligning the
wire with the groove on the bulb.
cover by turning it counterclock-
wise.
2.Reach your hand into the back of
the front bumper.
7.
8.
Connect the headlight bulb socket
connector.
2.
Remove the socket from the
assembly by turning the socket
counterclockwise until the tabs on
the socket align with the slots on
the assembly.
3.Disconnect the power connector
from the socket.
Install the headlight bulb cover by
turning it clockwise.
4.Remove
the bulb-socket from the
housing by turning the socket
counterclockwise until the tabs on
the socket align with the slots on
the housing.
i Information
-
3. Insert a new bulb by inserting it
into the socket and rotating it until
it locks into place.
Bi-Function projection
headlamp
4.
Install the socket in the assembly
by aligning the tabs on the socket
with the slots in the assembly.
Push the socket into the assembly
and turn the socket clockwise.
This headlamp is bi-function type that
switches the low beam to high or the
high beam to low using solenoid sys-
tem. So, the moving sound may be
heard when the headlamp switches
5.Install the new bulb-socket into the
housing by aligning the tabs on the
socket with the slots in the hous-
ing. Push the socket into the hous-
ing and turn the socket clockwise.
the low beam to high or the high beam 5. Install the turn signal light bulb
to low and it does not indicate mal-
cover by turning it clockwise.
function of the headlamp.
6.Connect
the socket.
the power connector to
7
7.Reinstall
cover.
the front bumper under
7-83
| Categories | Hyundai Manuals, Hyundai Creta Manuals |
|---|---|
| Download File |
|
| Document Type | Owners Manual |
| Language | English |
| Product Brand | Hyundai, Creta |
| Document File Type | |
| Copyright | Attribution Non-commercial |
(0 votes, average: 0 out of 5)