Starting and stopping the engine
for turbocharger intercooler
Engine Start/Stop button
(if equipped)
NOTICE
To prevent damage to the vehicle:
1.
Do not race or accelerate the
engine immediately after starting
the engine.
•
•
•
Do not hold the ignition key in the
START position for more than 10
seconds. Wait 5 to 10 seconds
before trying again.
If the engine is cold, idle for sever-
al seconds before sufficient lubri-
cation is ensured in the turbo
charger unit.
Do not turn the ignition switch to
the START position with the
engine running. It may damage the
starter.
2.
After high speed or extended driv-
ing that requires heavy engine
load, idle the engine about one
minute before turning the engine
off.
If traffic and road conditions per-
mit, you may put the shift lever in
the N (Neutral) position while the
vehicle is still moving and turn the
OGC054019
5
This idle time will allow the tur-
bocharger to cool prior to shutting
the engine off.
ignition switch to the START posi- Whenever the front door is opened,
tion in an attempt to restart the the Engine Start/Stop button will illu-
minate and will go off 30 seconds
after the door is closed. (if equipped)
engine.
•
Do not push or tow your vehicle to
start the engine.
NOTICE
Do not turn off the engine immedi-
ately after it has been subjected to a
heavy load. Doing so may cause
severe damage to the engine or
turbo charger unit.
5-9
| Categories | Hyundai Manuals, Hyundai Creta Manuals |
|---|---|
| Download File |
|
| Document Type | Owners Manual |
| Language | English |
| Product Brand | Hyundai, Creta |
| Document File Type | |
| Copyright | Attribution Non-commercial |
(0 votes, average: 0 out of 5)