Maintenance
6.
Install a new headlight bulb and Turn signal light
snap the headlight bulb retaining
wire into position by aligning the
wire with the groove on the bulb.
1.
Remove the turn signal light bulb
cover by turning it counterclock-
wise.
Headlight
7.
8.
Connect the headlight bulb socket
connector.
2.
Remove the socket from the
assembly by turning the socket
counterclockwise until the tabs on
the socket align with the slots on
the assembly.
Install the headlight bulb cover by
turning it clockwise.
Parking
(Position) light
Turn signal light
3.
4.
Insert a new bulb by inserting it
into the socket and rotating it until
it locks into place.
OGS075050
Headlight (Low/High)
Install the socket in the assembly
by aligning the tabs on the socket
with the slots in the assembly.
Push the socket into the assembly
and turn the socket clockwise.
1.
Open the hood.
2.
Remove the headlight bulb cover
by turning it counterclockwise.
3.
4.
Disconnect the headlight bulb
socket-connector.
5.
Install the turn signal light bulb
cover by turning it clockwise.
Unsnap the headlight bulb retain-
ing wire by depressing the end
and pushing it upward.
5.
Remove the bulb from the head-
light assembly.
7-80
| Categories | Hyundai Manuals, Hyundai Creta Manuals |
|---|---|
| Download File |
|
| Document Type | Owners Manual |
| Language | English |
| Product Brand | Hyundai, Creta |
| Document File Type | |
| Copyright | Attribution Non-commercial |
(0 votes, average: 0 out of 5)