Changing tires
Follow these steps to change your
vehicle’s tire:
(Continued)
•
ALWAYS place the jack on the
designated jacking positions on
the vehicle and NEVER on the
bumpers or any other part of the
vehicle for jacking support.
WARNING
1. Park on a level, firm surface.
2.
Move the shift lever into P (Park,
for automatic transaxle vehicle) or
neutral (for manual transaxle
vehicle), apply the parking brake,
and place the ignition switch in the
LOCK/OFF position.
A vehicle can slip or roll off of a
jack causing serious injury or
death to you or those nearby.
Take the following safety precau-
tions:
•
Do not start or run the engine
while the vehicle is on the jack.
•
Do not get under a vehicle that
is supported by a jack.
• Do not allow anyone to remain
in the vehicle while it is on the
jack.
3.
4.
Press the hazard warning flasher
button.
•
NEVER attempt to change a tire
in the lane of traffic. ALWAYS
move the vehicle completely off
the road on level, firm ground
away from traffic before trying to
change a tire. If you cannot find
a level, firm place off the road,
call a towing service for assis-
tance.
Remove the wheel lug nut wrench,
jack, jack handle, and spare tire
from the vehicle.
•
Keep children away from the
road and the vehicle.
5.
Block both the front and rear of the
tire diagonally opposite of the tire
you are changing.
6
•
Be sure to use the jack provided
with the vehicle.
(Continued)
6-17
| Categories | Hyundai Manuals, Hyundai Creta Manuals |
|---|---|
| Download File |
|
| Document Type | Owners Manual |
| Language | English |
| Product Brand | Hyundai, Creta |
| Document File Type | |
| Copyright | Attribution Non-commercial |
(0 votes, average: 0 out of 5)