Check
the
Parking
Brake Warning Light by
ignition
NOTICE
WARNING
•
Do not apply the accelerator pedal
brake
placing
the
•
Whenever leaving the vehicle or
parking, always come to a com-
plete stop and continue to
depress the brake pedal. Move
the shift lever into the 1st gear
while
the
parking
is
switch to the ON posi-
tion (do not start the
engine).
engaged. If you depress the accel-
erator pedal with the parking brake
engaged, warning will sound.
Damage to the parking brake may
occur.
This light will be illuminated when the
parking brake is applied with the igni-
tion switch in the START or ON posi-
tion.
(
for manual transaxle vehicle) or
P (Park, for automatic transaxle
vehicle) position, then apply the
parking brake, and place the
ignition switch in the LOCK/OFF
position.
•
Driving with the parking brake on
can overheat the braking system
and cause premature wear or
damage to brake parts. Make sure
the parking brake is released and
the Brake Warning Light is off
before driving.
Before driving, be sure the parking
brake is released and the Brake
Warning Light is OFF.
Vehicles with the parking brake
not fully engaged are at risk for
moving inadvertently and caus-
ing injury to yourself or others.
5
•
•
NEVER allow anyone who is
unfamiliar with the vehicle to
touch the parking brake. If the
parking brake is released unin-
tentionally, serious injury may
occur.
Only release the parking brake
when you are seated inside the
vehicle with your foot firmly on
the brake pedal.
5-33
| Categories | Hyundai Manuals, Hyundai Creta Manuals |
|---|---|
| Download File |
|
| Document Type | Owners Manual |
| Language | English |
| Product Brand | Hyundai, Creta |
| Document File Type | |
| Copyright | Attribution Non-commercial |
(0 votes, average: 0 out of 5)