1999 Land Rover Range Rover 4.0 & 4.6 Litre, Defender V8i Electrical Manual V8 Engine

ENGINE
Valve seat inserts - renew
Valve seats and seat inserts - refacing
NOTE: Service valve seat inserts are
available 0.025 mm (0.001 in) oversize on
outside diameter to ensure interference fit.
CAUTION: Renew worn valve guides and
seat inserts before lapping valves to their
seats.
1.
Remove worn valve seats.
1.  Check condition of valve seats and valves that
are to be re-used.
CAUTION: Take care not to damage
counterbore in cylinder head.
2.  Remove carbon from valve seats.
3.
Reface valves as necessary. If a valve has to
be ground to a knife-edge to obtain a true seat,
fit a new valve.
Valve seating face angle A = 45°
2.
Heat cylinder head evenly to approximately
120° C (250° F).
WARNING: Handle hot cylinder head with
care.
3.
4.
Using a suitable mandrel, press new insert fully
into counterbore.
Allow cylinder head to air cool.
10
OVERHAUL
Product Specification
CategoriesLand Rover, Land Rover Defender, Range Rover
Tags
Model Year1999
Download File
Please Enter the Security Characters Shown Below. Letters are Case Sensitive. Your download link will appear upon completing this step.
- 75 pages
Product NameRange Rover 4.0 & 4.6 Litre, Defender V8i
Product BrandLand Rover
Document File TypePDF
Publisherlandrover.com
Wikipedia's Pagehttp://en.wikipedia.org/wiki/Land_Rover
CopyrightAttribution Non-commercial
(0 votes, average: 0 out of 5)

Submit your review (optional)
(will not be displayed)
* Required Field