ENGINE
5.
Lightly oil threads of new cylinder head bolts.
Cylinder head - refit
1.
2.
Clean cylinder block and cylinder head faces
using suitable gasket removal spray and a
plastic scraper.
Eensure that bolt holes in cylinder block are
clean and dry.
CAUTION: Do not use metal scraper or
machined surfaces may be damaged.
NOTE: RH cylinder head illustrated.
6.
7.
Fit new cylinder head bolts:
Long bolts: 1, 3 and 5
Short bolts: 2, 4, 6, 7, 8, 9 and 10
Using sequence shown, tighten cylinder head
bolts to:
Stage 1 - 20 Nm (15 lbf.ft)
Stage 2 - 90 degrees
Stage 3 - Further 90 degrees
CAUTION: Do not tighten bolts 180° in one
operation.
3.
4.
Fit cylinder head gasket with the word ’TOP’
uppermost.
8.
9.
Fit rocker shaft assembly.
Repeat above procedures for remaining
cylinder head.
NOTE: Gasket must be fitted dry.
Carefully fit cylinder head and locate on
dowels.
OVERHAUL
13
| Categories | Land Rover, Land Rover Defender, Range Rover |
|---|---|
| Tags | Land Rover |
| Model Year | 1999 |
| Download File |
|
| Product Name | Range Rover 4.0 & 4.6 Litre, Defender V8i |
| Product Brand | Land Rover |
| Document File Type | |
| Publisher | landrover.com |
| Wikipedia's Page | http://en.wikipedia.org/wiki/Land_Rover |
| Copyright | Attribution Non-commercial |
(0 votes, average: 0 out of 5)