ENGINE
Timing cover - refit
NOTE: Timing cover, oil pump and oil
pressure relief valve are only supplied as
an assembly.
1.
2.
Clean sealant from threads of timing cover
bolts.
Clean all traces of gasket material from mating
faces of timing cover and cylinder block.
CAUTION: Use a plastic scraper.
3.
4.
Clean oil seal location in timing cover.
Lubricate oil pump gears and oil seal recesses
in timing cover with engine oil.
5.
6.
7.
Position timing gears on work surface with
timing marks aligned.
Fit timing chain around gears, keeping timing
marks aligned.
5. Apply Hylosil jointing compound to new timing
cover gasket, position gasket to cylinder block.
Fit gear and chain assembly.
NOTE: Timing marks must be facing
forwards.
6.
7.
Locate tool LRT-12-090 on timing cover and
oil pump drive gear.
Position timing cover to cylinder block and at
the same time, rotate tool LRT-12-090 until
drive gear keyway is aligned with Woodruff
key.
8.
Fit timing cover to cylinder block.
8.
Fit camshaft gear bolt, restrain camshaft gear
and tighten bolt to 50 Nm (37 lbf.ft).
OVERHAUL
17
Categories | Land Rover, Land Rover Defender, Range Rover |
---|---|
Tags | Land Rover |
Model Year | 1999 |
Download File |
|
Product Name | Range Rover 4.0 & 4.6 Litre, Defender V8i |
Product Brand | Land Rover |
Document File Type | |
Publisher | landrover.com |
Wikipedia's Page | http://en.wikipedia.org/wiki/Land_Rover |
Copyright | Attribution Non-commercial |
(0 votes, average: 0 out of 5)