ENGINE
Crankshaft - refit
1.
Clean main bearing caps, bearing shell
recesses and mating surfaces of cylinder
block.
CAUTION: Ensure bolt holes in cylinder
block and main bearing caps are clean
and dry.
7.
8.
Fit side seals to rear main bearing cap.
CAUTION: Seals must protrude
approximately 1.5 mm (0.05 in) above
bearing cap face.
Apply a 3 mm (0.12 in) wide bead of Hylomar
PL32 jointing compound to bearing cap rear
mating face on cylinder block.
CAUTION: Ensure sealant does not enter
bolt holes.
2.
3.
Fit new upper main bearing shells, with oil
holes and grooves, in cylinder block, ensuring
flanged shell is fitted in centre position.
9.
Lubricate rear main bearing shell and side
seals with engine oil, carefully fit rear main
bearing cap assembly; fit and tighten main
bearing cap bolts to 5 Nm (4 lbf.ft).
NOTE: If crankshaft has been reground
ensure appropriate oversize bearing shells
are fitted.
CAUTION: Ensure that engine oil does not
enter side bolt holes in bearing cap.
Lubricate main bearing shells with engine oil
and position crankshaft in cylinder block.
Fit new main bearing shells to bearing caps.
Lubricate main bearing shells with engine oil.
Fit numbers 1 to 4 main bearing caps ensuring
that reference marks made during dismantling
are aligned, fit and tighten main bearing cap
bolts to 5 Nm (4 lbf.ft).
10.
11.
Smear new Dowty washers with engine oil and
fit to main bearing cap side bolts.
Fit and tighten RH then LH side bolts to 5 Nm
4.
5.
6.
(4
lbf.ft) ensuring that socket head cap bolt is
fitted to rear main bearing cap on RH side of
cylinder block adjacent to starter motor
aperture.
NOTE: Do not fit side bolts at this stage.
OVERHAUL
45
| Categories | Land Rover, Land Rover Defender, Range Rover |
|---|---|
| Tags | Land Rover |
| Model Year | 1999 |
| Download File |
|
| Product Name | Range Rover 4.0 & 4.6 Litre, Defender V8i |
| Product Brand | Land Rover |
| Document File Type | |
| Publisher | landrover.com |
| Wikipedia's Page | http://en.wikipedia.org/wiki/Land_Rover |
| Copyright | Attribution Non-commercial |
(0 votes, average: 0 out of 5)