ENGINE
Drive plate and ring gear - inspection
Drive plate and ring gear assembly - refit - Up to
engine nos. 42D00593A and 46D00450A
1.
2.
3.
Inspect drive plate for cracks and distortion.
Renew drive plate if necessary.
Inspect ring gear for worn, chipped and broken
teeth.
CAUTION: To prevent distortion to drive
plate when bolted to torque converter,
drive plate setting height must be checked
as follows:
4.
Renew ring gear assembly if necessary.
1.
2.
Fit original selective shim and hub aligner, fit
socket head cap screws and tighten to 85 Nm
(63
lbf.ft).
Fit drive plate assembly and buttress ring
ensuring that reference marks are aligned; fit
bolts and tighten to 45 Nm (33 lbf.ft).
CAUTION: If a new drive plate assembly is
being fitted, paint mark on plate must face
towards torque converter.
3.
4.
Check the setting height A.
Up to engine no. 42D00593A = 21.25 to
21.37
mm (0.83 to 0.84 in)
Up to engine no. 46D00450A = 7.69 to 7.81
mm (0.30 to 0.31 in)
If setting height is not as specified, remove
buttress ring, drive plate assembly, hub aligner
and selective shim.
OVERHAUL
37
Categories | Land Rover, Land Rover Defender, Range Rover |
---|---|
Tags | Land Rover |
Model Year | 1999 |
Download File |
|
Product Name | Range Rover 4.0 & 4.6 Litre, Defender V8i |
Product Brand | Land Rover |
Document File Type | |
Publisher | landrover.com |
Wikipedia's Page | http://en.wikipedia.org/wiki/Land_Rover |
Copyright | Attribution Non-commercial |
(0 votes, average: 0 out of 5)