1999 Land Rover Range Rover 4.0 & 4.6 Litre, Defender V8i Electrical Manual V8 Engine

ENGINE
Camshaft and tappets - remove
3.
4.
Remove 2 bolts securing camshaft thrust plate
to cylinder block, remove plate.
Withdraw camshaft, taking care not to damage
bearings in cylinder block.
1.
Remove tappets and retain with their
respective pushrods.
NOTE: Camshafts fitted to 4.0 litre engines
are colour coded ORANGE whilst those
fitted to 4.6 litre engines are colour coded
RED.
2.
When tappets prove difficult to remove due to
damaged camshaft contact area, proceed as
follows. Lift tappets in pairs to the point where
damaged face is about to enter tappet bore
and fit rubber bands to retain tappets. Repeat
until all tappets are retained clear of camshaft
lobes. The tappets can then be withdrawn out
the bottom of their bores when the sump and
camshaft are removed.
OVERHAUL
25
Product Specification
CategoriesLand Rover, Land Rover Defender, Range Rover
Tags
Model Year1999
Download File
Please Enter the Security Characters Shown Below. Letters are Case Sensitive. Your download link will appear upon completing this step.
- 75 pages
Product NameRange Rover 4.0 & 4.6 Litre, Defender V8i
Product BrandLand Rover
Document File TypePDF
Publisherlandrover.com
Wikipedia's Pagehttp://en.wikipedia.org/wiki/Land_Rover
CopyrightAttribution Non-commercial
(0 votes, average: 0 out of 5)

Submit your review (optional)
(will not be displayed)
* Required Field