Driver Shift Control (DSC)
The odometer on the instrument panel cluster will
change from the mileage to a number indicating the
requested gear range when moving the shift lever
forward or rearward. See Speedometer and Odometer
on page 3-33 for more information on the odometer.
Notice: If you drive your vehicle at high RPMs
without upshifting while using Driver Shift Control
(DSC), you could damage your vehicle. Always
upshift when necessary while using DSC.
While using the DSC feature, the vehicle will have firmer
shifting and increased performance. You can use this
for sport driving or when climbing or descending hills,
to stay in gear longer, or to down shift for more power or
engine braking.
Your automatic transmission has a Driver Shift Control
(DSC) feature that allows you to change gears similar to
a manual transmission. To use the DSC feature:
1.
Slide the shift lever over from AUTOMATIC
OVERDRIVE (D) to the right into the DSC area.
The transmission will only allow you to shift into gears
appropriate for the vehicle speed and engine
Revolutions Per Minute (RPM). The transmission will
not automatically shift to the next higher gear if the
engine RPM is too high.
The sport mode light in the
instrument panel cluster
will come on.
If shifting is prevented for any reason, the currently
selected gear will flash multiple times, indicating that
the transmission has not shifted gears.
While in the DSC mode, the transmission will
automatically downshift when the vehicle comes to a
stop and while quickly applying the accelerator to
increase speed. This will allow for more power during
take-off.
If you do not move the shift lever forward or
rearward, the vehicle will be in sport mode. When
you are in the sport mode the vehicle will still
shift automatically. While driving in sport mode, the
transmission may remain in a gear longer than it
would in the normal driving mode based on braking,
throttle input, and vehicle lateral acceleration.
When accelerating your vehicle from a stop in snowy
and icy conditions, you may want to shift into second
gear. A higher gear allows you to gain more traction on
slippery surfaces.
2.
To enter the DSC mode, press the shift lever
forward to upshift or rearward to downshift.
2-29
| Categories | Cadillac CTS Manuals, Cadillac Manuals |
|---|---|
| Tags | Cadillac CTS 2.8, Cadillac CTS 3.6, Cadillac CTS 6.0 |
| Model Year | 2006 |
| Download File |
|
| Document File Type | |
| Copyright | Attribution Non-commercial |
(0 votes, average: 0 out of 5)