5.
If the child restraint is forward-facing, attach and
tighten the top tether to the top tether anchor.
Refer to the child restraint instructions and
the following steps:
{
CAUTION:
Each top tether anchor and lower anchor in the
vehicle is designed to hold only one child
restraint. Attaching more than one child
restraint to a single anchor could cause the
anchor or attachment to come loose or even
break during a crash. A child or others could
be injured if this happens. To help prevent
injury to people and damage to your vehicle,
attach only one child restraint per anchor.
5.1. Find the top tether anchor.
5.2.
5.3.
5.4.
Press the ribbed area of the trim cover to
open the cover and expose the anchor.
If you have an adjustable head restraint,
raise the head restraint.
Route and tighten the top tether according to
your child restraint instructions and the
following instructions:
If the position you are
using does not have a
head restraint and you are
using a single tether,
route the tether over the
seatback.
1.
Find the lower anchors, if equipped, for the desired
seating position.
2.
If the desired seating position does not have lower
anchors, see Securing a Child Restraint in a Rear
Seat Position on page 1-44 for instructions on
installing the child restraint using the safety belts.
If the position you are
using does not have a
head restraint and you are
using a dual tether,
route the tether over the
seatback.
3.
4.
Put the child restraint on the seat.
Attach and tighten the lower attachments on the
child restraint to the lower anchors, if equipped,
in the vehicle. The child restraint instructions
will show you how.
1-43
| Categories | Cadillac CTS Manuals, Cadillac Manuals |
|---|---|
| Tags | Cadillac CTS 2.8, Cadillac CTS 3.6, Cadillac CTS 6.0 |
| Model Year | 2006 |
| Download File |
|
| Document File Type | |
| Copyright | Attribution Non-commercial |
(0 votes, average: 0 out of 5)