To Use the Engine Coolant Heater
4. Before starting the engine, be sure to unplug and
store the cord as it was before to keep it away
from moving engine parts. If you do not, it could be
damaged.
1.
2.
Turn off the engine.
Open the hood and unwrap the electrical cord.
For the 2.8L V6 and the 3.6L V6 engines, the
cord is located in the engine compartment on the
passenger’s side of the vehicle in front of the
fuse block. For the 6.0L V8 engine, the cord is
located in the engine compartment on the driver’s
side of the vehicle near the inner fender and above
the strut.
How long should you keep the coolant heater plugged
in? The answer depends on the outside temperature,
the kind of oil you have, and some other things. Instead
of trying to list everything here, we ask that you contact
your dealer in the area where you will be parking
your vehicle. The dealer can give you the best advice
for that particular area.
You must remove the plastic cap to access the plug.
Plug it into a normal, grounded 110-volt AC outlet.
Automatic Transmission Operation
3.
The shift lever is located on the center console between
the front seats.
{
CAUTION:
There are several different
positions for the shift lever.
Plugging the cord into an ungrounded outlet
could cause an electrical shock. Also, the
wrong kind of extension cord could overheat
and cause a fire. You could be seriously
injured. Plug the cord into a properly grounded
three-prong 110-volt AC outlet. If the cord will
not reach, use a heavy-duty three-prong
extension cord rated for at least 15 amps.
2-26
| Categories | Cadillac CTS Manuals, Cadillac Manuals |
|---|---|
| Tags | Cadillac CTS 2.8, Cadillac CTS 3.6, Cadillac CTS 6.0 |
| Model Year | 2006 |
| Download File |
|
| Document File Type | |
| Copyright | Attribution Non-commercial |
(0 votes, average: 0 out of 5)