Front Turn Signal and Fog Lamps
5. Pull the old bulb from the bulb socket keeping the
bulb straight as you pull it out.
A. Turn Signal Lamp
B. Fog Lamp
6.
7.
Install a new bulb.
Reverse the steps to reinstall the lamp assembly.
Taillamps, Turn Signal, Stoplamps
and Sidemarker Lamps
A. Taillamps and
Stoplamps
B. Turn Signal Lamp
C. Sidemarker Lamp
To replace a fog or turn signal lamp bulb, do the
following:
1.
Remove the protection shield located on the
underside of the front of the vehicle by pulling
out the push-pins located on the underside of the
protection shield.
2.
3.
Reach up behind the front bumper area from under
the vehicle to access the lamp housing.
Remove the bulb socket from the housing by
turning the bulb socket one-quarter turn
counterclockwise.
1. Open the trunk. See Trunk on page 2-12 for more
information.
4.
Remove the electrical connector from the bulb by
lifting the two plastic clips.
2. Remove the compact spare tire cover by turning the
wing nut counterclockwise.
5-54
| Categories | Cadillac CTS Manuals, Cadillac Manuals |
|---|---|
| Tags | Cadillac CTS 2.8, Cadillac CTS 3.6, Cadillac CTS 6.0 |
| Model Year | 2006 |
| Download File |
|
| Document File Type | |
| Copyright | Attribution Non-commercial |
(0 votes, average: 0 out of 5)