3.
4.
Remove the four convenience net wing nuts.
Back-Up and License Plate Lamps
Pull the carpet back away from the body of the
vehicle on the side with the burned out bulb.
5.
6.
7.
Remove the two mounting screws from the
lamp assembly.
Pull out the lamp assembly to expose the
bulb sockets.
Turn the bulb socket one-quarter turn
counterclockwise and pull the bulb socket out of
the lamp reflector.
8.
Pull the old bulb from the bulb socket keeping the
bulb straight as you pull it out.
A. Back-Up Lamps
9.
Install a new bulb.
B. License Plate Lamps
10.
Reverse the steps to reinstall the lamp assembly.
To replace a back-up or license plate bulb, do the
following:
1.
Open the trunk. See Trunk on page 2-12 for more
information.
2.
Remove the cloth cover on the trunk lid by pulling
out the three push-pins located on the underside of
the trunk lid.
5-55
| Categories | Cadillac CTS Manuals, Cadillac Manuals |
|---|---|
| Tags | Cadillac CTS 2.8, Cadillac CTS 3.6, Cadillac CTS 6.0 |
| Model Year | 2006 |
| Download File |
|
| Document File Type | |
| Copyright | Attribution Non-commercial |
(0 votes, average: 0 out of 5)