Exiting the vehicle
KEYLESS GLOBAL CLOSING
To initiate global window closing (if enabled),
touch and hold the lock sensor (1) for 3
seconds. This will also single lock the vehicle
and activate the alarm.
Note: The windows will close only while the
sensor (1) is covered. To fully secure the
vehicle, continue to touch the sensor until all
windows are fully closed.
DRIVE-AWAY LOCKING
Drive-away locking automatically locks all
doors at a set speed when the vehicle is in
motion. This feature can be enabled/disabled
via Drive-away locking in the Vehicle Settings
menu. See 56, VEHICLE INFORMATION AND
SETTINGS MENU.
The vehicle will not lock automatically.
Note: Keyless locking will activate only if the
Smart Key is detected outside the vehicle. If no
Smart Key is present, no locking will occur.
To single lock the vehicle, touch the lock
sensor (1) on a door handle once. The
hazard warning lamps will flash once to
confirm locking. Power fold mirrors will
fold in (if enabled).
SELECTING VALET MODE
Valet mode allows the vehicle to be driven, e.g.,
by a parking attendant, but leaves the tailgate
locked and restricts use of the touch screen.
This prevents access to telephone numbers,
navigation addresses and audio system
settings.
To double lock the vehicle, touch (1) twice
within 3 seconds. The hazard warning
lamps will flash twice to confirm (with a
long second flash). Power fold mirrors will
fold in (if enabled). An audible confirmation
may also be given (if enabled).
From the Home menu, select Valet:
Enter a four digit Personal identification
Number (PIN) (personally chosen). On
completion, touch the OK soft key.
Note: When locking the vehicle via Keyless
locking, if one or more of the doors, the bonnet
or the tailgate is not fully closed, or the ignition
is ON, the vehicle will NOT lock. There will be
NO audible mislock error warning. The hazard
warning lamps will NOT flash and the door
mirrors (if enabled) will NOT fold in. Check that
all doors, the bonnet and the tailgate are closed
properly. Ensure the ignition is turned OFF and
lock the vehicle again. If the mislock persists,
consult a Land Rover Dealer/Authorised
Repairer.
If you wish to cancel the PIN, select Delete.
After entering the PIN, you will be prompted to
enter the PIN again. Enter the same PIN and
touch OK to confirm.
A pop-up screen is displayed, confirming your
vehicle is now in Valet mode.
14
Categories | Land Rover, Land Rover Evoque |
---|---|
Tags | Land Rover |
Model Year | 2011 |
Download File |
|
Language | Bulgarian, English |
Product Name | Evoque Handbook |
Product Brand | Land Rover |
Applicable to Country | Bulgaria, International |
Document File Type | |
Publisher | landrover.com |
Wikipedia's Page | http://en.wikipedia.org/wiki/Land_Rover |
Copyright | Attribution Non-commercial |
(0 votes, average: 0 out of 5)