2011 Land Rover Evoque Handbook Manual

Maintenance
Maintenance
REAR FOG LAMP
Access to a rear fog lamp housing is from
beneath and behind the rear bumper. The bulb
holder is a black plastic unit that incorporates
the bulb. No tools are required but a torch may
be of use.
1.
2.
3.
To remove the bulb holder, press in the
outer wings on the black plastic unit and
pull the holder free of the housing.
To separate the bulb holder from the
electrical connector, first push up the
connector lock.
Push in the release mechanism while
pulling the connector and bulb holder
apart.
Note: Inside the bulb holder are three locating
lugs. When fitting the new bulb unit, the lugs
must mate up to the connector correctly.
Refitting is a reverse of the removal process.
Ensure that the connector lock is pressed down
and that the bulb unit locates securely into the
fog lamp housing.
7
Product Specification
CategoriesLand Rover, Land Rover Evoque
Tags
Model Year2011
Download File
Please Enter the Security Characters Shown Below. Letters are Case Sensitive. Your download link will appear upon completing this step.
- 258 pages
LanguageBulgarian, English
Product NameEvoque Handbook
Product BrandLand Rover
Applicable to CountryBulgaria, International
Document File TypePDF
Publisherlandrover.com
Wikipedia's Pagehttp://en.wikipedia.org/wiki/Land_Rover
CopyrightAttribution Non-commercial
(0 votes, average: 0 out of 5)

Submit your review (optional)
(will not be displayed)
* Required Field