Maintenance
WIPER BLADE REPLACEMENT
Fit only replacement wiper blades that are
identical to the original specification.
Before changing a wiper blade, the wiper arms
must be set in the ‘service’ position as follows;
Note: The Smart Key must remain in the
vehicle while wiper blades are replaced.
1.
2.
3.
Ensure that the ignition is turned off.
Turn the ignition on then off again.
Immediately push the wiper control down
to start the single wipe operation and turn
on the ignition again.
The wipers will move to their service
position.
4.
When the new parts have been fitted, turn
the ignition off. This will return the wipers
to park position.
Front wiper blade: Lift the blade clear of the
screen.
1.
2.
Push down on the button and hold.
Pull the wiper blade away from the button.
When the new blade is pushed into the
receiver, the button will click into place.
Rear wiper blade: Lift the blade clear of the
screen.
3.
4.
Prise the tab out and hold.
Slide the blade down the wiper arm to clear
the mounting.
When the new blade is pushed into the
wiper arm, the tab will click into place.
175
| Categories | Land Rover, Land Rover Evoque |
|---|---|
| Tags | Land Rover |
| Model Year | 2011 |
| Download File |
|
| Language | Bulgarian, English |
| Product Name | Evoque Handbook |
| Product Brand | Land Rover |
| Applicable to Country | Bulgaria, International |
| Document File Type | |
| Publisher | landrover.com |
| Wikipedia's Page | http://en.wikipedia.org/wiki/Land_Rover |
| Copyright | Attribution Non-commercial |
(0 votes, average: 0 out of 5)