2014 Hyundai Ix35 Owners Manual

EL(FL) UK 3.QXP  8/5/2013  6:27 PM  Page 24
Safetyfeatures of your vehicle
When  the  vehicle stops  suddenly,  or  if
the  occupant  tries  to  lean  forward  too
quickly,  the  seat belt  retractor  will  lock
into position. In  certain frontal collisions,
the  pre-tensioner  will  activate  and  pull
the seat  belt into tighter  contact against
the occupant's body.
If the system senses  excessive seat belt
tension on the driver or passenger's seat
belt when the pre-tensioner activates, the
load  limiter inside  the pre-tensioner  will
release  some  of   the  pressure  on  the
affected seat belt. (if equipped)
OLM039031
OED030300/H
Routing the seat  belt webbing through     Pre-tensioner seat belt
the rear seat belt guides will help keep     (if  equipped)
the belts from being trapped  behind or
WARNING
Your vehicle is equipped with driver's and
front   passenger's   pre-tensioner    seat
belts.The purpose of the pre-tensioner is
to make sure that the seat belts fit  tightly
against  the  occupant's  body  in  certain
frontal collisions. The  pre-tensioner seat
belts may be  activated in crashes where
the frontal collision is severe enough.
For  your  safety,  be  sure  that  the
belt webbing is not loose or twisted
and  always   sit  properly  on   your
seat.
under the seats.
After inserting the seat belt, tighten the
belt webbing by pulling it up.
CAUTION
When  using  the   seat  belt,  use  it
after taking it out of the guides.
If you pull the seat belt when it is
stored in the guides, it may damage
the guides and/or belt webbing.
3
24
Product Specification
Categories Hyundai Manuals, Hyundai ix35 Manuals
Download File
Please Enter the Security Characters Shown Below. Letters are Case Sensitive. Your download link will appear upon completing this step.
- 1534 pages
Document TypeOwners Manual
LanguageEnglish
Product BrandHyundai, ix35
Document File TypePDF
CopyrightAttribution Non-commercial
(0 votes, average: 0 out of 5)

Submit your review (optional)
(will not be displayed)
* Required Field