EL(FL) Aust 7.QXP 7/26/2013 2:25 PM Page 67
Maintenance
Front fog light bulbs (if equipped)
4. With the head lamp and battery in nor-
mal condition, aim the head lamps so
the brightest portion falls on the hori-
zontal and vertical lines.
1.
2.
Remove the front bumper under cover.
Reach your hand into the back of the
front bumper.
5.
To aim the low/high beam left or right,
turn the driver (2) clockwise or coun-
terclockwise.To aim the low/high beam
up or down, turn the driver (1) clock-
wise or counterclockwise.
3.
4.
Disconnect the power connector from
the socket.
Remove the bulb-socket from the
housing by turning the socket counter
clockwise until the tabs on the socket
align with the slots on the housing.
5.
Install the new bulb-socket into the
housing by aligning the tabs on the
socket with the slots in the housing.
Push the socket into the housing and
turn the socket clockwise.
OEL073257
Headlight and front fog light aim-
ing
6.
7.
Connect the power connector to the
socket.
Reinstall the front bumper under cover.
Headlight aiming
1.
Inflate the tyres to the specified pres-
sure and remove any loads from the
vehicle except the driver, spare tyre,
and tools.
2.
3.
The vehicle should be placed on a flat
floor.
Draw vertical lines (Vertical lines pass-
ing through respective head lamp cen-
tres) and a horizontal line (Horizontal
line passing through centre of head
lamps) on the screen.
7
67
| Categories | Hyundai Manuals, Hyundai ix35 Manuals |
|---|---|
| Download File |
|
| Document Type | Owners Manual |
| Language | English |
| Product Brand | Hyundai, ix35 |
| Document File Type | |
| Copyright | Attribution Non-commercial |
(0 votes, average: 0 out of 5)