EL(FL) Eng 5.QXP 7/11/2013 11:01 AM Page 8
Driving your vehicle
Starting and stopping the engine for tur-
bocharger intercooler
Glow indicator light
1.
Do not race or accelerate the engine
immediately after starting.
To start the diesel engine when the
engine is cold, it has to be pre-heated
before starting the engine and then have
to be warmed up before starting to drive.
If the engine is cold, idle for several
seconds before sufficient lubrication is
ensured in the turbocharger unit.
1.
Make sure the parking brake is
applied.
- Depress the
2.
After high speed or extended driving,
requiring a heavy engine load, idle the
engine about 1 minute before turning it
off.
2.
clutch
pedal fully and shift the
transaxle into Neutral. Keep the clutch
pedal and brake pedal depressed
while turning the ignition switch to the
start position.
This idle time will allow the tur-
bocharger to cool prior to shutting the
engine off.
W-60
3.
4.
Turn the ignition switch to the ON posi-
tion to pre-heat the engine. Then the
glow indicator light will illuminate.
-
lever
Depress the brake pedal fully.
Place the
in P(park).
transaxle
shift
If the glow indicator light goes out, turn
the ignition switch to the START posi-
tion and hold it there until the engine
starts (a maximum of 10 seconds),
then release the key.
You can also start the engine when the
shift lever is in the N(neutral) position.
✽
If the engine were not started within 10
seconds after the preheating is complet-
ed, turn the ignition key once more to
the LOCK position during 10 seconds,
and then to the ON position, in order to
preheat again.
5
8
| Categories | Hyundai Manuals, Hyundai ix35 Manuals |
|---|---|
| Download File |
|
| Document Type | Owners Manual |
| Language | English |
| Product Brand | Hyundai, ix35 |
| Document File Type | |
| Copyright | Attribution Non-commercial |
(0 votes, average: 0 out of 5)