EL(FL) Aust 4a.QXP 7/26/2013 2:36 PM Page 96
Features of your vehicle
To vary the speed setting, turn the speed
control knob (1).
CAUTION
If the wiper switch is set in AUTO mode
when the ignition switch is ON, the wiper
will operate once to perform a self-check
of the system. Set the wiper to OFF posi-
tion when the wiper is not in use.
When washing the vehicle, set the
wiper switch in the OFF position to
stop the auto wiper operation.
The wiper may operate and be dam-
aged if the switch is set in the AUTO
mode whilst washing the vehicle.
Do not remove the sensor cover
located on the upper end of the
driver side windscreen glass.
Damage to system parts could
occur and may not be covered by
your vehicle warranty.
CAUTION
When the ignition switch is ON and
the windscreen wiper switch is
placed in the AUTO mode, use cau-
tion in the following situations to
avoid any injury to the hands or
other parts of the body:
Rain sensor
OLM049347R
Auto control (if equipped)
When starting the vehicle in winter,
set the wiper switch in the OFF
position. Otherwise, wipers may
operate and ice may damage the
windscreen wiper blades. Always
remove all snow and ice and defrost
the windscreen properly prior to
operating the windscreen wipers.
The rain sensor located on the upper end
of the windscreen glass senses the
amount of rainfall and controls the wiping
cycle for the proper interval. The more it
rains, the faster the wiper operates.When
the rain stops, the wiper stops.
•
•
•
Do not touch the upper end of the
windscreen glass facing the rain
sensor.
Do not wipe the upper end of the
windscreen glass with a damp or
wet cloth.
Do not put pressure on the wind-
screen glass.
4
96
Product Specification
Categories | Hyundai Manuals, Hyundai ix35 Manuals |
---|---|
Download File |
|
Document Type | Owners Manual |
Language | English |
Product Brand | Hyundai, ix35 |
Document File Type | |
Copyright | Attribution Non-commercial |