EL(FL) Eng 6.QXP 7/11/2013 10:53 AM Page 30
What to do in an emergency
Checking the tire inflation pres- ✽ NOTICE
sure
1.After
km (4~6 miles or about 10 min), compressor is running. To get an
stop at a safety location.
WARNING
The pressure gauge may show high-
driving approximately 7~10 er than actual reading when the
The tire inflation pressure must
be at least 220 kPa (32 psi). If it
is not, do not continue driving.
accurate tire reading, the compres-
sor needs to be turned off.
2.Connect connection hose (9) of the
compressor directly to the tire
valve.
Call for road side service or
towing.
-
To reduce the inflation pres-
sure: Press the button 8 on the
compressor.
3.Plug
the compressor power cord
into the vehicle power outlet.
the tire inflation pressure to
CAUTION - Tire pressure
sensor
4.Adjust
the recomended tire inflation.
CAUTION
The sealant on the tire pressure
sensor and wheel should be
removed when you replace the
tire with a new one and inspect
the tire pressure sensors in
authorized dealer.
With the ignition swithched on, pro-
ceed as follows.
If the inflation pressure is not
maintained, drive the vehicle a
-
To increase the inflation pres-
sure : Switch on the compressor,
position I. To check the current
inflation pressure setting, briefly
switch off the compressor.
second
time,
refer
to
Distributing the sealant. Then
repeat steps 1 to 4.
Use of the TMK may be ineffec-
tual for tire damage larger than
approximately 4 mm (0.16 in).
WARNING
We recommend that you contact
an authorized HYUNDAI dealer
if the tire cannot be made road-
worthy with the Tire Mobility Kit.
Do not let the compressor run
for more than 10 minutes, other-
wise the device will overheat
and may be damaged.
6
30
| Categories | Hyundai Manuals, Hyundai ix35 Manuals |
|---|---|
| Download File |
|
| Document Type | Owners Manual |
| Language | English |
| Product Brand | Hyundai, ix35 |
| Document File Type | |
| Copyright | Attribution Non-commercial |
(0 votes, average: 0 out of 5)