EL(FL) UK 6.QXP 8/5/2013 6:54 PM Page 30
What to do in an emergency
Checking the tyre inflation pres- ✽ NOTICE
sure
WARNING
The pressure gauge may show high-
1.
2.
3.
After driving approximately 4~6 er than actual reading when the
The tyre inflation pressure must
be at least 220 kPa (32 psi). If it
is not, do not continue driving.
miles (7~10 km or about 10 min), compressor is running. To get an
stop at a safety location.
accurate tyre reading, the compres-
sor needs to be turned off.
Connect connection hose (9) of
the compressor directly to the tyre
valve.
Call for road side service or
towing.
- To reduce the inflation pres-
sure: Press the button 8 on the
compressor.
Plug the compressor power cord
into the vehicle power outlet.
CAUTION - Tyre pressure
sensor
4
. Adjust the tyre inflation pressure
to the recomended tyre inflation.
With the ignition switched on, pro-
ceed as follows.
CAUTION
The sealant on the tyre pressure
sensor and wheel should be
removed when you replace the
tyre with a new one and inspect
the tyre pressure sensors in
authorised dealer.
If the inflation pressure is not
maintained, drive the vehicle a
second
Distributing the sealant. Then
repeat steps 1 to 4.
time,
refer
to
-
To increase the inflation pres-
sure: Switch on the compressor,
position I. To check the current
inflation pressure setting, briefly
switch off the compressor.
Use of the TMK may be ineffec-
tual for tyre damage larger than
approximately 4 mm (0.16 in).
WARNING
We recommend that you contact
a HYUNDAI authorised repairer
if the tyre cannot be made road-
worthy with the Tyre Mobility
Kit.
Do not let the compressor run
for more than 10 minutes, other-
wise the device will overheat
and may be damaged.
6
30
| Categories | Hyundai Manuals, Hyundai ix35 Manuals |
|---|---|
| Download File |
|
| Document Type | Owners Manual |
| Language | English |
| Product Brand | Hyundai, ix35 |
| Document File Type | |
| Copyright | Attribution Non-commercial |
(0 votes, average: 0 out of 5)